amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Bat in a Santa Hat Ornament modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 44 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
1/3
Temps
~2 h
Taille
10.8 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet bat ornament pattern: a Bat in a Santa Hat Ornament amigurumi, about 11 cm tall in DK yarn with a 2.5 mm hook. It is a round black bat with big white eyes, tiny fangs, pink inner ears, spread dark grey wings and a little red Santa hat with a white pompom that carries the hanging loop. You need about 70 m of yarn: 30 m black, 10 m dark grey, 10 m red, 10 m white, 5 m pink and 5 m light pink. Plan on roughly 2 hours. A great ornament for spooky-cute Christmas trees and for friends who love both bats and holidays. It also works as a small desk decoration. Rotate the 3D model to see the wings and hat, and follow the round-by-round pattern.

Comment crocheter Bat in a Santa Hat Ornament

Pour débutants · 11 cm de haut · environ 2 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 10 pièces en rangs : Body, Ear ×2, Wing ×2, Santa hat, Pompom, Cheek ×2, Hanging loop (67 rangs au total).
  2. Rembourrez et assemblez en 7 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 11 prêts

Dans le même genre

Tous les modèles d’amigurumi chauve-souris →Tout dans animaux →
  • Aperçu de Winnie-the-Pooh with a Honey Pot
    Générateur
    CrocheterRemix

    Winnie-the-Pooh with a Honey Pot

    par le générateur de modèles

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 60

  1. Size before assembly: about 6.6 cm at the widest, 5.4 cm long; 22 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 3.2 cm at the widest, 4.1 cm long; 12 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 3 mm deep in front, a rounded back; about 32 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) -->

  1. Flat motif — half circle (worked in turned rows, one layer of fabric), about 4.1 × 7.8 cm; 9 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. Size before assembly: about 3.1 cm at the widest, 4.8 cm long; 14 rounds.
  2. Change to white (pull it through on the last yarn-over of R11).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Bend ≈ 115° around round 7<!-- the bend spreads over 5 rounds -->. Bend the piece so the inner side of the bend faces toward the toy's right on the finished toy (on the piece: in round 7, 4.5 st from the centre front line, toward the toy's right <!-- st 4.65 right -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 4 to round 9, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 5 rounds) and fasten off inside.

  1. Size before assembly: about 2.3 cm at the widest, 1.9 cm long; 7 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 0.9 cm across; 1 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2 cm at the widest, 0.7 cm long; 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in red (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Felt (white), 2 ovals 15×15 mm (on the body) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: in round 12, 3.5 st from the centre front line, toward the toy's left .
  • Safety eyes with a printed glint 10 mm (on the body): between rounds 12 and 13, 7 st apart (count along round 12: about 3.5 st each side of the centre front line).
  • Embroidery in pink thread (on the body), straight stitches through: (in round 13, 2 st from the centre front line, toward the toy's right ) → (in round 14, 1 st from the centre front line, toward the toy's right ) → (in round 14, on the centre front line) → (in round 14, 1 st from the centre front line, toward the toy's left ) → (in round 13, 2 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the body): in white thread, a triangle about 3.4 mm wide and 4.2 mm tall, horizontal stitches; centred between rounds 14 and 15, 1 st from the centre front line, toward the toy's right .
  • Satin stitch (on the body): in white thread, a triangle about 3.4 mm wide and 4.2 mm tall, horizontal stitches; centred between rounds 14 and 15, 1 st from the centre front line, toward the toy's left .

Body · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Tigger the Bouncy Tiger
    Générateur
    CrocheterRemix

    Tigger the Bouncy Tiger

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Speedy Blue Hedgehog
    Générateur
    CrocheterRemix

    Speedy Blue Hedgehog

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de White Beagle with Black Ears
    Générateur
    CrocheterRemix

    White Beagle with Black Ears

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Grey Tabby Loaf Cat
    Générateur
    CrocheterRemix

    Grey Tabby Loaf Cat

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Confused Yellow Duck
    Générateur
    CrocheterRemix

    Confused Yellow Duck

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Pudding Puppy in a Beret
    Générateur
    CrocheterRemix

    Pudding Puppy in a Beret

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Electric Yellow Mouse
    Générateur
    CrocheterRemix

    Electric Yellow Mouse

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Piglet in a Green Jumper
    Générateur
    CrocheterRemix

    Piglet in a Green Jumper

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Peter Rabbit in a Blue Jacket
    Générateur
    CrocheterRemix

    Peter Rabbit in a Blue Jacket

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Bunny in a Pink Hood
    Générateur
    CrocheterRemix

    Bunny in a Pink Hood

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Simple White Bunny in a Dress
    Générateur
    CrocheterRemix

    Simple White Bunny in a Dress

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done