amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Nourriture

Boba Tea Cat modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 75 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesNourriture

Difficulté
2/3
Temps
~3 h
Taille
14.4 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet boba pattern: a Boba Tea Cat amigurumi, about 14 cm tall in DK yarn with a 2.5 mm hook. A cup of milk tea with a white lid, a fat mint-green straw, pointy cat ears with pink insides, a tiny pink nose and whiskers has a row of black tapioca pearls at the bottom and a little tail at the back. You need about 85 m of yarn: 35 m tan, 15 m black, 10 m white, 5 m mint, 5 m light grey, 5 m caramel, 5 m coral and 5 m pink. Plan on roughly 3 hours. It makes a sweet gift for bubble tea fans and cat people, or a cheerful buddy for a desk or a shelf. Turn the 3D model around and follow the round-by-round pattern at your own pace.

Comment crocheter Boba Tea Cat

Intermédiaire · 14 cm de haut · environ 3 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 21 pièces en rangs : Cup, Straw, Ear ×2, Tail, Arm ×2, Cheek ×2, Tapioca pearl ×12 (75 rangs au total).
  2. Rembourrez et assemblez en 7 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 13 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 48

  1. Size before assembly: about 6.6 cm at the widest, 10.7 cm long; 34 rounds.
  2. Change to caramel (pull it through on the last yarn-over of R6).
  3. Change to tan (pull it through on the last yarn-over of R8).
  4. Change to light grey (pull it through on the last yarn-over of R23).
  5. Change to white (pull it through on the last yarn-over of R25).
  6. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  7. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.6 cm at the widest, 4.2 cm long; 11 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 3.5 cm at the widest, 2.1 cm long; 7 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 4 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 35 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 55 %) -->

  1. Size before assembly: about 1.2 cm at the widest, 5.3 cm long; 15 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.1 cm at the widest, 1.4 cm long; 4 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 12 mm (on the cup): in round 21, 6 st apart (count along round 21: about 3 st each side of the centre front line).
  • Satin stitch (on the cup): in pink thread, a triangle about 5 mm wide and 3.5 mm tall, horizontal stitches, turned 180° clockwise (looking at that surface); centred in round 20, on the centre front line .
  • Embroidery in dark brown thread (on the cup), straight stitches through: (between rounds 19 and 20, on the centre front line) → (in round 19, on the centre front line).
  • Embroidery in dark brown thread (on the cup) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 19, on the centre front line) → (between rounds 18 and 19, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 18 and 19, 1 st from the centre front line, toward the toy's left ) → (in round 19, 2 st from the centre front line, toward the toy's left ).
  • Embroidery in dark brown thread (on the cup) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 20 and 21, 5 st from the centre front line, toward the toy's left ) → (between rounds 20 and 21, 6.5 st from the centre front line, toward the toy's left) → (between rounds 20 and 21, 8 st from the centre front line, toward the toy's left ).
  • Embroidery in dark brown thread (on the cup) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 19 and 20, 5 st from the centre front line, toward the toy's left ) → (in round 19, 6.5 st from the centre front line, toward the toy's left ) → (in round 19, 8 st from the centre front line, toward the toy's left ).

Cup · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done