amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Bunny in an Easter Basket modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 113 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
3/3
Temps
~4 h
Taille
16.5 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet easter basket pattern: a Bunny in an Easter Basket amigurumi, about 16 cm tall in DK yarn with a 2.5 mm hook. A white bunny with tall ears and pink cheeks sits in a pink and white striped basket with three striped eggs, and a tiny yellow chick perches between its ears. You need about 130 m of yarn: 75 m white, 20 m pink, 10 m rose, 5 m cream, 5 m mint, 5 m yellow, 5 m lilac and 5 m orange. Plan on roughly 4 hours. Make it as an Easter centrepiece or a gift for a bunny lover. Spin the 3D model to see all the eggs and follow the round-by-round pattern.

Comment crocheter Bunny in an Easter Basket

Avancé · 17 cm de haut · environ 4 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 14 pièces en rangs : Basket, Body, Head, Ear ×2, Chick, Beak, Paw ×2, Egg, Lilac egg, Yellow egg, Cheek ×2 (138 rangs au total).
  2. Rembourrez et assemblez en 11 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 13 prêts

Dans le même genre

Tous les modèles d’amigurumi lapin →Tout dans animaux →
  • Aperçu de Winnie-the-Pooh with a Honey Pot
    Générateur
    CrocheterRemix

    Winnie-the-Pooh with a Honey Pot

    par le générateur de modèles

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 104

  1. Size before assembly: about 9.3 cm at the widest, 6.3 cm long; 25 rounds.
  2. Change to pink (pull it through on the last yarn-over of R9).
  3. Change to white (pull it through on the last yarn-over of R11).
  4. Change to pink (pull it through on the last yarn-over of R13).
  5. Change to white (pull it through on the last yarn-over of R15).
  6. Change to pink (pull it through on the last yarn-over of R17).
  7. Change to white (pull it through on the last yarn-over of R19).
  8. Change to pink (pull it through on the last yarn-over of R21).
  9. Change to white (pull it through on the last yarn-over of R23).
  10. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 5 cm at the widest, 5.5 cm long; 20 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 7.4 cm at the widest, 5.8 cm long; 24 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.8 cm at the widest, 6.7 cm long; 19 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 1.2 mm deep in front, a rounded back; about 18 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 30 %) -->

  1. Size before assembly: about 2.4 cm at the widest, 2.2 cm long; 8 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 0.8 cm at the widest (lies flat); 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.3 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 2.7 cm at the widest, 3.7 cm long; 11 rounds.
  2. Change to white (pull it through on the last yarn-over of R4).
  3. Change to mint (pull it through on the last yarn-over of R6).
  4. Change to rose (pull it through on the last yarn-over of R8).
  5. Change to mint (pull it through on the last yarn-over of R9).
  6. → Start stuffing (firmly) and keep adding as you decrease.
  7. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 9 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.7 cm at the widest, 3.7 cm long; 11 rounds.
  2. Change to white (pull it through on the last yarn-over of R3).
  3. Change to lilac (pull it through on the last yarn-over of R5).
  4. Change to white (pull it through on the last yarn-over of R7).
  5. Change to lilac (pull it through on the last yarn-over of R9).
  6. → Start stuffing (firmly) and keep adding as you decrease.
  7. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 9 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.7 cm at the widest, 3.7 cm long; 11 rounds.
  2. Change to rose (pull it through on the last yarn-over of R4).
  3. Change to cream (pull it through on the last yarn-over of R6).
  4. → Start stuffing (firmly) and keep adding as you decrease.
  5. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 9 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the head): between rounds 12 and 13, 8 st apart (count along round 12: about 3.9 st each side of the centre front line).
  • Satin stitch (on the head): in rose thread, a oval about 5 mm wide and 3.6 mm tall, horizontal stitches; centred in round 14, on the centre front line .
  • Embroidery in dark brown thread (on the head), straight stitches through: (between rounds 14 and 15, on the centre front line ) → (between rounds 15 and 16, on the centre front line ) → (between rounds 15 and 16, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 15 and 16, 1 st from the centre front line, toward the toy's right ).
  • Embroidery in dark brown thread (on the head), straight stitches through: (between rounds 14 and 15, on the centre front line ) → (between rounds 15 and 16, on the centre front line ) → (between rounds 15 and 16, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 15 and 16, 1 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the chick) (2, symmetric: the toy's left side is described, the right is its mirror image): in black thread, a oval about 3 mm wide and 3.4 mm tall, horizontal stitches; centred between rounds 3 and 4, 1 st from the centre front line, toward the toy's left .

Basket · R1–R5

MR××××××VVVVVV×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Tigger the Bouncy Tiger
    Générateur
    CrocheterRemix

    Tigger the Bouncy Tiger

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Speedy Blue Hedgehog
    Générateur
    CrocheterRemix

    Speedy Blue Hedgehog

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de White Beagle with Black Ears
    Générateur
    CrocheterRemix

    White Beagle with Black Ears

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Grey Tabby Loaf Cat
    Générateur
    CrocheterRemix

    Grey Tabby Loaf Cat

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Confused Yellow Duck
    Générateur
    CrocheterRemix

    Confused Yellow Duck

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Pudding Puppy in a Beret
    Générateur
    CrocheterRemix

    Pudding Puppy in a Beret

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Electric Yellow Mouse
    Générateur
    CrocheterRemix

    Electric Yellow Mouse

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Piglet in a Green Jumper
    Générateur
    CrocheterRemix

    Piglet in a Green Jumper

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Peter Rabbit in a Blue Jacket
    Générateur
    CrocheterRemix

    Peter Rabbit in a Blue Jacket

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Bunny in a Pink Hood
    Générateur
    CrocheterRemix

    Bunny in a Pink Hood

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Simple White Bunny in a Dress
    Générateur
    CrocheterRemix

    Simple White Bunny in a Dress

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done