amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Nourriture

Bitten Chocolate Bunny modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 67 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesNourriture

Difficulté
1/3
Temps
~3 h
Taille
15.8 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet chocolate bunny pattern: a Bitten Chocolate Bunny amigurumi, about 16 cm tall in DK yarn with a 2.5 mm hook. A glossy brown chocolate bunny in a gold foil collar and red bow, with two bitten-off ear stubs and a wide-eyed, outraged face. You need about 80 m of yarn: 60 m brown, 10 m gold, 5 m red and 5 m tan. Plan on roughly 3 hours. Makes a funny Easter basket filler or a desk buddy for chocolate lovers. Turn the 3D model around and follow the round-by-round pattern, a quick make with one main piece.

Comment crocheter Bitten Chocolate Bunny

Pour débutants · 16 cm de haut · environ 3 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 7 pièces en rangs : Body with head, Short bitten ear, Longer bitten ear, Foot ×2, Tail, Gold foil collar (72 rangs au total).
  2. Rembourrez et assemblez en 7 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 9 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 55

  1. Size before assembly: about 8.3 cm at the widest, 12.3 cm long; 41 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.2 cm at the widest, 2 cm long; 6 rounds.
  2. Change to brown (pull it through on the last yarn-over of R3).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 1.6 mm deep in front, a rounded back; about 22 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 35 %) -->

  1. Size before assembly: about 2.6 cm at the widest, 3.3 cm long; 10 rounds.
  2. Change to brown (pull it through on the last yarn-over of R4).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 1.9 mm deep in front, a rounded back; about 26 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 35 %) -->

  1. Size before assembly: about 1.6 cm at the widest, 1.9 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.4 cm at the widest, 1.2 cm long; 4 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 6.7 cm at the widest, 1.2 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Felt (white), 2 ovals 14×14 mm (on the body with head) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: between rounds 33 and 34, 4 st from the centre front line, toward the toy's left.
  • Safety eyes with a printed glint 8 mm (on the body with head): between rounds 33 and 34, 7 st apart (count along round 33: about 3.7 st each side of the centre front line).
  • Embroidery in black thread (on the body with head), straight stitches through: (between rounds 37 and 38, 3.5 st from the centre front line, toward the toy's right ) → (between rounds 36 and 37, 3 st from the centre front line, toward the toy's right ) → (in round 35, 2 st from the centre front line, toward the toy's right ).
  • Embroidery in black thread (on the body with head), straight stitches through: (between rounds 37 and 38, 3.5 st from the centre front line, toward the toy's left ) → (between rounds 36 and 37, 3 st from the centre front line, toward the toy's left ) → (in round 35, 2 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the body with head): in black thread, a oval about 11 mm wide and 10 mm tall, horizontal stitches; centred between rounds 30 and 31, on the centre front line.
  • Satin stitch (on the body with head): in pink thread, a oval about 7 mm wide and 4 mm tall, horizontal stitches; centred between rounds 29 and 30, on the centre front line .
  • Satin stitch (on the body with head): in dark brown thread, a oval about 6 mm wide and 4 mm tall, horizontal stitches; centred in round 33, on the centre front line .

Body with head · R1–R5

MR××××××VVVVVV×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done