amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Bunny Lovey with Knotted Blanket modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 83 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
2/3
Temps
~3 h
Taille
15 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet bunny lovey pattern: a Bunny Lovey with Knotted Blanket amigurumi, about 15 cm tall in DK yarn with a 2.5 mm hook. A cream bunny head with long floppy ears and pink cheeks rests on a soft sage blanket with four knotted corners. You need about 100 m of yarn: 45 m sage, 40 m cream, 5 m mint, 5 m pink and 5 m blush. Plan on roughly 3 hours. A sweet baby-shower gift or a cuddle companion for a nursery shelf. Spin the 3D model and follow the round-by-round pattern, including the flat blanket pillow and its little corner knots.

Comment crocheter Bunny Lovey with Knotted Blanket

Intermédiaire · 15 cm de haut · environ 3 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 10 pièces en rangs : Blanket pillow, Corner knot ×4, Bunny head, Long floppy ear ×2, Cheek ×2 (83 rangs au total).
  2. Rembourrez et assemblez en 6 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 10 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 64

  1. Size before assembly: an oval about 10.5 × 4.1 cm at the widest, 10.9 cm long; 32 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the bottom of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 8 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With sage: ch 18.
  3. Change to mint (pull it through on the last yarn-over of R7).
  4. Change to sage (pull it through on the last yarn-over of R9).
  5. → Start stuffing (lightly) and keep adding as you decrease.
  6. Change to mint (pull it through on the last yarn-over of R28).
  7. Change to sage (pull it through on the last yarn-over of R31).
  8. Press the piece flat to about 4.7 cm thick (oval cross-section).<!-- press the piece flat by 55 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Of these: top — 2 (left and right); low — 2 (left and right). Size before assembly: about 1.3 cm at the widest, 1.7 cm long; 5 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 7.8 cm at the widest, 5.5 cm long; 24 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 3.2 cm at the widest, 6.8 cm long; 20 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre bottom line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 3.4 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 32 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 50 %) --> Bend ≈ 90° around round 20<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 6 twist 0 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 20, 0.5 st from the centre bottom line, toward the back <!-- st 0.53 back -->). Let it hang still turned the way it is sewn on (pinch it a little at the seam): its inside stays visible, it does not lie against the head.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 9 mm (on the bunny head): in round 12, 9 st apart (count along round 12: about 4.3 st each side of the centre front line).
  • Satin stitch (on the bunny head): in rose thread, a oval about 6 mm wide and 4 mm tall, horizontal stitches; centred in round 14, on the centre front line .
  • Embroidery in dark brown thread (on the bunny head), straight stitches through: (between rounds 14 and 15, on the centre front line ) → (between rounds 15 and 16, 1 st from the centre front line, toward the toy's left ) → (in round 15, 1.5 st from the centre front line, toward the toy's left ).
  • Embroidery in dark brown thread (on the bunny head), straight stitches through: (between rounds 14 and 15, on the centre front line ) → (between rounds 15 and 16, 1 st from the centre front line, toward the toy's right ) → (in round 15, 1.5 st from the centre front line, toward the toy's right ).

Abréviations

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet