amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Fantastique

Christmas Gnome modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 98 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesFantastique

Difficulté
3/3
Temps
~3 h
Taille
12.3 cm
Bizarrerie
2/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A free crochet Christmas gnome pattern for a little Scandinavian tomte with a tall drooping red hat pulled down over his eyes and a big round nose. This amigurumi gnome has a long ribbed white beard, a soft grey body, dark green mittens and tiny brown boots, plus a white pom-pom and a sprig of mistletoe on his hat. He is worked in the round in single crochet with DK yarn and a 2.5 mm hook and stands about 12 cm (5 in) tall; there are no safety eyes, and the beard gets its texture from post-stitch ribbing. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to check every piece before the holidays.

Comment crocheter Christmas Gnome

Avancé · 12 cm de haut · environ 3 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 14 pièces en rangs : Robe body, Hat, Pom-pom, Nose, Beard, Arm ×2, Boot ×2, Mistletoe leaf ×2, Berry ×3 (99 rangs au total).
  2. Rembourrez et assemblez en 12 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 12 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 79

  1. Size before assembly: about 7.4 cm at the widest, 7.3 cm long; 27 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 6.7 cm at the widest, 11 cm long; 29 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 150° around round 12<!-- the bend spreads over 8 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's left on the finished toy (on the piece: in round 12, 3 st from the centre front line, toward the toy's left <!-- st 2.85 left -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 7 to round 17, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 10 rounds) and fasten off inside.

  1. Size before assembly: about 1.6 cm at the widest, 1.6 cm long; 5 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.4 cm at the widest, 2.2 cm long; 8 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 4.4 cm at the widest, 4.8 cm long; 14 rounds.
  2. → Start stuffing (moderately) and keep adding as you decrease.
  3. Press the piece flat to about 3.5 cm thick (oval cross-section).<!-- press the piece flat by 20 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.2 cm at the widest, 2.8 cm long; 8 rounds.
  2. Change to robe (pull it through on the last yarn-over of R3).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.6 cm at the widest, 1.5 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 40 %).

  1. Flat motif — leaf (pointed leaf, worked in rounds, one layer of fabric), about 3.4 × 1.5 cm; 1 row.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. Size before assembly: about 0.7 cm at the widest, 0.9 cm long; 2 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Robe body · R1–R5

MR××××××VVVVVV×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done