amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Plantes

Christmas Tree modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 91 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesPlantes

Difficulté
3/3
Temps
~4 h
Taille
21.8 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

This free crochet Christmas tree pattern makes a cheerful three-tier tree with a happy face and a golden star on top. The amigurumi Christmas tree has snowy white scalloped trims on every tier, colorful red, blue, yellow and pink bauble bobbles, rosy cheeks and a little brown trunk. The three stacked cones and the trunk are worked in the round in single crochet with DK yarn and a 2.5 mm hook, the trims and padded baubles are sewn on, and with its 12 mm safety eyes and star it stands about 22 cm (8.5 in) tall. Follow it row by row with stitch counts and turn the interactive 3D model to see where every bauble goes.

Comment crocheter Christmas Tree

Avancé · 22 cm de haut · environ 4 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 27 pièces en rangs : Bottom tier, Middle tier, Top tier, Trunk, Star, Cheek ×2, Bottom tier trim, Middle tier trim, Top tier trim, Red bauble ×5, Blue bauble ×4, Yellow bauble ×5, Pink bauble ×3 (99 rangs au total).
  2. Rembourrez et assemblez en 26 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 13 prêts

Dans le même genre

Tous les modèles d’amigurumi sapin de Noël →Tout dans plantes →
  • Aperçu de Baby Tree Creature in a Pot
    Générateur
    CrocheterRemix

    Baby Tree Creature in a Pot

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 97

  1. Size before assembly: about 9.2 cm at the widest, 8 cm long; 31 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 6.9 cm at the widest, 6.4 cm long; 24 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 4.6 cm at the widest, 5.3 cm long; 18 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 3.3 cm at the widest, 2.2 cm long; 8 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Flat motif — star (worked in rounds, one layer of fabric), about 4.8 × 5 cm; 2 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 10.6 cm at the widest (lies flat); 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 8.3 cm at the widest (lies flat); 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 5.7 cm at the widest (lies flat); 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Of these: on the bottom tier — 2; on the middle tier — 2; on the top tier — 1. A flat circle about 1.4 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Of these: on the bottom tier — 2; on the middle tier — 1; on the top tier — 1. A flat circle about 1.4 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Of these: on the bottom tier — 2; on the middle tier — 2; on the top tier — 1. A flat circle about 1.4 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Of these: on the bottom tier — 1; on the middle tier — 1; on the top tier — 1. A flat circle about 1.4 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 12 mm (on the bottom tier): between rounds 20 and 21, 5 st apart (count along round 20: about 2.7 st each side of the centre front line).
  • Embroidery in dark brown thread (on the bottom tier), straight stitches through: (between rounds 18 and 19, 0.5 st from the centre front line, toward the toy's right ) → (in round 18, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 17 and 18, on the centre front line ) → (in round 18, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 18 and 19, 0.5 st from the centre front line, toward the toy's left ).

Bottom tier · R1–R5

MR××××××VVVVVV×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    par le générateur de modèles
    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Mushroom Keychain
    Générateur
    CrocheterRemix

    Mushroom Keychain

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Cactus Keychain
    Générateur
    CrocheterRemix

    Cactus Keychain

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Tulip in a Heart Pot with Bee
    Générateur
    CrocheterRemix

    Tulip in a Heart Pot with Bee

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Shy Rose in a Mustard Pot
    Générateur
    CrocheterRemix

    Shy Rose in a Mustard Pot

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Mushroom Couple Cap to Cap
    Générateur
    CrocheterRemix

    Mushroom Couple Cap to Cap

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Succulent Trio in a Long Pot
    Générateur
    CrocheterRemix

    Succulent Trio in a Long Pot

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Mushroom Family of Three
    Générateur
    CrocheterRemix

    Mushroom Family of Three

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Monstera in a Pot with a Cat
    Générateur
    CrocheterRemix

    Monstera in a Pot with a Cat

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    2/5
    Réalisé
    0
  • Aperçu de Tiny Desk Cactus with a Bee
    Générateur
    CrocheterRemix

    Tiny Desk Cactus with a Bee

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Christmas Wreath with a Face
    Générateur
    CrocheterRemix

    Christmas Wreath with a Face

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Smiling Pinecone Ornament
    Générateur
    CrocheterRemix

    Smiling Pinecone Ornament

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done