amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Corgi Puppy modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 103 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
3/3
Temps
~4 h
Taille
16.6 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A free crochet corgi pattern for a sitting corgi puppy with big upright ears, a white blaze down its face and a happy little pink tongue. This amigurumi corgi has an orange-tan coat, a cream muzzle, chest and paws, pink inner ears and pink toe beans, plus a cream heart on its fluffy bum. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook and is about 17 cm (6.5 in) tall, with 15 mm safety eyes, a safety nose and an embroidered smile. Follow it row by row with stitch counts and turn the interactive 3D model to see where every piece goes.

Comment crocheter Corgi Puppy

Avancé · 17 cm de haut · environ 4 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 13 pièces en rangs : Body, Head, Muzzle, Ear ×2, Cheek ×2, Front leg ×2, Hind foot ×2, Tail, Fluffy bum heart (108 rangs au total).
  2. Rembourrez et assemblez en 9 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 9 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 97

  1. Size before assembly: about 8.2 cm at the widest, 6.7 cm long; 27 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Change to ginger (pull it through on the last yarn-over of R23).
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 9.4 cm at the widest, 8.7 cm long; 33 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 3.4 × 2.2 cm at the widest, 1.4 cm long; 5 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With cream: ch 5.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 5 cm at the widest, 4.7 cm long; 14 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 5.7 mm deep in front, a rounded back; about 50 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 55 %) -->

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2 cm at the widest, 3 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 3.8 cm at the widest, 2.4 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.5 cm at the widest, 1.2 cm long; 4 rounds.
  2. Change to ginger (pull it through on the last yarn-over of R2).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Flat motif — heart (worked in rounds, one layer of fabric), about 4.8 × 5 cm; 5 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 15 mm (on the head): in round 17, 9 st apart (count along round 17: about 4.4 st each side of the centre front line).
  • Safety nose, triangle, 10×7.5 mm (on the muzzle): in round 1, on the centre top line . Colour nose #1c1a1a.
  • Embroidery in nose thread (on the muzzle), straight stitches through: (between rounds 1 and 2, on the centre bottom line ) → (in round 2, on the centre bottom line ).
  • Embroidery in nose thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 2, on the centre bottom line ) → (in round 3, 1.5 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 2.5 st from the centre bottom line, toward the toy's left ).
  • Satin stitch (on the muzzle): in tongue thread, a oval about 6 mm wide and 5 mm tall, horizontal stitches; centred in round 3, on the centre bottom line .
  • Satin stitch (on the hind foot) (2: one on each hind foot; the left one is described, the right is its mirror): in toe thread, a oval about 5 mm wide and 7 mm tall, horizontal stitches; centred in round 3, 1.5 st from the centre bottom line, toward the toy's left.
  • Satin stitch (on the hind foot) (2: one on each hind foot; the left one is described, the right is its mirror): in toe thread, a oval about 5 mm wide and 7 mm tall, horizontal stitches; centred in round 3, on the centre bottom line.
  • Satin stitch (on the hind foot) (2: one on each hind foot; the left one is described, the right is its mirror): in toe thread, a oval about 5 mm wide and 7 mm tall, horizontal stitches; centred in round 3, 1.5 st from the centre bottom line, toward the toy's right.

Body · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done