amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux marins

Crab modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 84 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux marins

Difficulté
3/3
Temps
~4 h
Taille
10.6 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A free crochet crab pattern for a cheerful red-orange amigurumi crab with big googly eyes on stalks and its claws raised high. This crab plushie has a wide, flat oval body with a peach underside, two big pincer claws on short arms, six little legs, pink cheeks and a happy stitched smile. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook; the body is one oval piece, safety eyes sit in cream eye bumps, and each claw is a palm with two fingers, for a crab about 11 cm (4 in) tall and 18 cm (7 in) wide. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to see where every claw and leg goes.

Comment crocheter Crab

Avancé · 11 cm de haut · environ 4 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 21 pièces en rangs : Oval body, Eye stalk ×2, Eye bump ×2, Arm ×2, Claw palm ×2, Claw finger ×4, Leg ×6, Cheek ×2 (84 rangs au total).
  2. Rembourrez et assemblez en 11 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 9 prêts

Dans le même genre

Tous les modèles d’amigurumi crabe →Tout dans animaux marins →
  • Aperçu de Tiny Blue Turtle
    Générateur
    CrocheterRemix

    Tiny Blue Turtle

    par le générateur de modèles

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 60

  1. Size before assembly: an oval about 10.9 × 7.7 cm at the widest, 6.1 cm long; 25 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the bottom of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With peach: ch 10.
  3. Change to coral (pull it through on the last yarn-over of R10).
  4. → Start stuffing (firmly) and keep adding as you decrease.
  5. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 20 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.6 cm at the widest, 3.1 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 3.2 cm at the widest, 2.5 cm long; 10 rounds.
  2. Change to coral (pull it through on the last yarn-over of R5).
  3. Change to cream (pull it through on the last yarn-over of R8).
  4. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  5. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2 cm at the widest, 3 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 4 cm at the widest, 4.1 cm long; 14 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Of these: upper — 2 (left and right); lower — 2 (left and right). Size before assembly: about 1.7 cm at the widest, 2.6 cm long; 8 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 30° around round 4<!-- the bend spreads over 2 rounds -->. After stuffing, bend the piece so the inner side of the bend faces forward on the finished toy (on the piece: in round 4, 0.5 st from the centre front line, toward the toy's left <!-- st 0.74 left -->). On the inner side draw rounds 4 and 5 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 3 st, pull to the angle and hide the end inside.

  1. Of these: front — 2 (left and right); mid — 2 (left and right); back — 2 (left and right). Size before assembly: about 1.2 cm at the widest, 2.4 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 55° around round 3<!-- the bend spreads over 2 rounds -->. After stuffing, bend the piece so the inner side of the bend faces down on the finished toy (on the piece: in round 3, 2.5 st from the centre front line, downward <!-- st 2.26 down -->). On the inner side draw rounds 2 and 4 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eye with a printed glint 14 mm (on the eye bump) (2: one on each eye bump; the left one is described, the right is its mirror): in round 1, on the centre top line.
  • Embroidery in black thread (on the oval body), straight stitches through: (in round 16, 2.5 st from the centre front line, toward the toy's right ) → (between rounds 15 and 16, 1.5 st from the centre front line, toward the toy's right ) → (in round 15, on the centre front line) → (between rounds 15 and 16, 1.5 st from the centre front line, toward the toy's left ) → (in round 16, 2.5 st from the centre front line, toward the toy's left ).

Abréviations

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Pink Starfish in Green Shorts
    Générateur
    CrocheterRemix

    Pink Starfish in Green Shorts

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de No-Sew Mini Whale
    Générateur
    CrocheterRemix

    No-Sew Mini Whale

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de No-Sew Narwhal
    Générateur
    CrocheterRemix

    No-Sew Narwhal

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Squid Keychain
    Générateur
    CrocheterRemix

    Squid Keychain

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Worry Octopus
    Générateur
    CrocheterRemix

    Worry Octopus

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Seal Doing a Belly Flop
    Générateur
    CrocheterRemix

    Seal Doing a Belly Flop

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Kraken in a Teacup
    Générateur
    CrocheterRemix

    Kraken in a Teacup

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Axolotl Leaning on a Heart
    Générateur
    CrocheterRemix

    Axolotl Leaning on a Heart

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Gamer Axolotl with Headphones
    Générateur
    CrocheterRemix

    Gamer Axolotl with Headphones

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Seahorse Holding a Pearl
    Générateur
    CrocheterRemix

    Seahorse Holding a Pearl

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Offended Puffed-Up Pufferfish
    Générateur
    CrocheterRemix

    Offended Puffed-Up Pufferfish

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0