amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Fantastique

Doll in a Bunny Costume modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 117 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesFantastique

Difficulté
3/3
Temps
~3 h
Taille
15.8 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A free crochet doll pattern for a chibi child in a pink bunny onesie, with two long ears on the hood and one of them folded over. This amigurumi doll in a bunny costume has a cream hood trim and tummy, deep pink inner ears, white paws and a pompom tail around a rosy-cheeked face. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook and sits about 16 cm (6 in) tall; it has 10 mm safety eyes with embroidered bangs and smile, and the ears, face patch, arms and feet are sewn on. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to see where the ears go, an easy pick for Easter or a gift.

Comment crocheter Doll in a Bunny Costume

Avancé · 16 cm de haut · environ 3 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 12 pièces en rangs : Onesie body, Leg ×2, Belly patch, Pompom tail, Hooded head, Bunny ear (folded), Bunny ear, Hood trim, Face, Arm ×2 (117 rangs au total).
  2. Rembourrez et assemblez en 10 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 10 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 85

  1. Size before assembly: about 5.9 cm at the widest, 6.2 cm long; 20 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.6 cm at the widest, 3.5 cm long; 10 rounds.
  2. Change to bunny pink (pull it through on the last yarn-over of R4).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat oval about 4.1 × 2.9 cm; 4 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With cream white: ch 5.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.8 cm at the widest, 1.8 cm long; 6 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 4 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 8.2 cm at the widest, 6.2 cm long; 26 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.2 cm at the widest, 5.2 cm long; 15 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Change to bunny pink (pull it through on the last yarn-over of R12).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 1.8 mm deep in front, a rounded back; about 22 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 40 %) --> Bend ≈ 70° around round 10<!-- the bend spreads over 5 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's left on the finished toy (on the piece: in round 10, 2.5 st from the centre front line, toward the toy's left <!-- st 2.32 left -->). On the inner side draw rounds 8 and 11 together (3 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 4 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 2.2 cm at the widest, 5.2 cm long; 15 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Change to bunny pink (pull it through on the last yarn-over of R12).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 1.8 mm deep in front, a rounded back; about 22 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 40 %) -->

  1. A flat oval about 7.1 × 5.1 cm; 7 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With cream white: ch 7.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat oval about 6 × 4.4 cm; 6 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With skin: ch 6.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Do not stuff.

  1. Size before assembly: about 1.2 cm at the widest, 2.8 cm long; 8 rounds.
  2. Change to bunny pink (pull it through on the last yarn-over of R2).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10 mm (on the face): in round 2, 9 st apart (count along round 2: about 4.6 st each side of the centre top line).
  • Embroidery in dark brown thread (on the face), straight stitches through: (between rounds 1 and 2, 1 st from the centre bottom line, toward the toy's left ) → (in round 2, 1 st from the centre bottom line, toward the toy's left ) → (in round 2, on the centre bottom line ) → (in round 2, 1 st from the centre bottom line, toward the toy's right ) → (between rounds 1 and 2, 1 st from the centre bottom line, toward the toy's right ).
  • Blush about 10 mm, dry pastel or blush (on the face, both sides): between rounds 3 and 4, 3 st from the centre bottom line, toward the toy's left . Colour pink.
  • Fringe (on the face): cut 12 pieces of yarn (dark brown) about 32 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along in round 4, 3 st from the centre top line, toward the toy's right -> in round 4, 1 st from the centre top line, toward the toy's right -> in round 4, 1 st from the centre top line, toward the toy's left -> in round 4, 3 st from the centre top line, toward the toy's left , evenly spaced. Trim to about 6 mm.

Onesie body · R1–R5

MR××××××VVVVVV×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done