amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Fantastique

Dragon Keychain modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 59 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesFantastique

Difficulté
1/3
Temps
~2 h
Taille
6.6 cm
Bizarrerie
2/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet dragon pattern: a Dragon Keychain amigurumi, about 7 cm tall in fingering yarn with a 2.0 mm hook. A tiny round teal dragon with a pale muzzle, gold horns, small dark wings, back spikes and a silver loop on top for a key ring. You need about 50 m of yarn: 25 m teal, 10 m dark teal, 5 m light teal, 5 m silver and 5 m gold. Plan on roughly 2 hours. Clip it to keys or a bag, or hang it on the tree as an ornament. The 3D model turns so you can see every side while you follow the pattern.

Comment crocheter Dragon Keychain

Pour débutants · 7 cm de haut · environ 2 h · fil fingering · crochet de 2 mm

  1. Crochetez les 13 pièces en rangs : Head body, Muzzle, Horn ×2, Spike ×3, Foot ×2, Tail, Wing ×2, Key ring loop (61 rangs au total).
  2. Rembourrez et assemblez en 10 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 10 prêts

Dans le même genre

Tous les modèles d’amigurumi dragon →Tout dans fantastique →
  • Aperçu de Green Dino with a Red Saddle
    Générateur
    CrocheterRemix

    Green Dino with a Red Saddle

RemixCrocheter

Échantillon

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 51

  1. Size before assembly: about 5.7 cm at the widest, 4.9 cm long; 26 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Change to teal (pull it through on the last yarn-over of R13).
  3. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 1.6 × 1.3 cm at the widest, 0.9 cm long; 4 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With light teal: ch 3.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 0.8 cm at the widest, 0.9 cm long; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Flat motif — triangle (worked in turned rows, one layer of fabric), about 0.5 × 0.9 cm; 2 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. Size before assembly: about 0.9 cm at the widest, 1 cm long; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1 cm at the widest, 2.3 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 60° around round 3<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 3, on the centre top line). On the inner side draw rounds 2 and 3 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 1.7 cm at the widest, 2.2 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 5 mm thick.<!-- flattened 70 % -->

  1. Size before assembly: about 1.5 cm at the widest, 0.8 cm long; 3 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in silver (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 8 mm (on the head body): in round 14, 10 st apart (count along round 14: about 4.8 st each side of the centre front line).
  • Blush about 6 mm, dry pastel or blush (on the head body, both sides): between rounds 11 and 12, 8 st from the centre front line, toward the toy's left . Colour pink.
  • Embroidery in dark teal thread (on the muzzle), straight stitches through: (in round 3, 0.5 st from the centre top line, toward the toy's right ) → (between rounds 3 and 4, 0.5 st from the centre top line, toward the toy's right ).
  • Embroidery in dark teal thread (on the muzzle), straight stitches through: (in round 3, 0.5 st from the centre top line, toward the toy's left ) → (between rounds 3 and 4, 0.5 st from the centre top line, toward the toy's left ).
  • Embroidery in dark red thread (on the muzzle), straight stitches through: (between rounds 1 and 2, on the centre top line ) → (in round 1, on the centre top line ) → (in round 1, on the centre top line ) → (between rounds 1 and 2, on the centre top line ).

Abréviations

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    par le générateur de modèles
    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Big Grey Forest Spirit
    Générateur
    CrocheterRemix

    Big Grey Forest Spirit

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Black Baby Dragon
    Générateur
    CrocheterRemix

    Black Baby Dragon

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Blue Alien with Big Ears
    Générateur
    CrocheterRemix

    Blue Alien with Big Ears

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Little Spider Hero
    Générateur
    CrocheterRemix

    Little Spider Hero

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Sleepy Big Belly Bear
    Générateur
    CrocheterRemix

    Sleepy Big Belly Bear

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Little Green Ogre
    Générateur
    CrocheterRemix

    Little Green Ogre

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Burlap Sack Doll
    Générateur
    CrocheterRemix

    Burlap Sack Doll

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Happy Snowman with Twig Arms
    Générateur
    CrocheterRemix

    Happy Snowman with Twig Arms

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Yellow Capsule Helper
    Générateur
    CrocheterRemix

    Yellow Capsule Helper

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Ghost in a Mouse Costume
    Générateur
    CrocheterRemix

    Ghost in a Mouse Costume

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Pirate Boy in a Straw Hat
    Générateur
    CrocheterRemix

    Pirate Boy in a Straw Hat

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0