amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Frog in Bunny Ears with an Egg modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 92 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
3/3
Temps
~3 h
Taille
12.1 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet frog pattern: a Frog in Bunny Ears with an Egg amigurumi, about 12 cm tall in DK yarn with a 2.5 mm hook. The toy is a green frog with a flat deadpan mouth and skeptical brows, white bunny ears on a headband (one drooping), and a striped pastel egg held to its belly. You need about 90 m of yarn: 55 m green, 10 m white, 5 m pale green, 5 m pink, 5 m light pink, 5 m yellow and 5 m coral. Plan on roughly 3 hours. A funny desk buddy and an easy Easter gift for anyone who likes frogs, bunnies or a dry sense of humour. Spin the 3D model and follow the round-by-round pattern to sew the ears on at different angles.

Comment crocheter Frog in Bunny Ears with an Egg

Avancé · 12 cm de haut · environ 3 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 14 pièces en rangs : Body, Eye bump ×2, Arm ×2, Hind leg (thigh) ×2, Foot ×2, Cheek ×2, Bunny ear, Drooping bunny ear, Easter egg (92 rangs au total).
  2. Rembourrez et assemblez en 9 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 12 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 75

  1. Size before assembly: about 9.1 cm at the widest, 7.4 cm long; 30 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Change to green (pull it through on the last yarn-over of R15).
  3. → Start stuffing (firmly) and keep adding as you decrease.
  4. Press the piece flat to about 6.8 cm thick (oval cross-section).<!-- press the piece flat by 25 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.8 cm at the widest, 2.6 cm long; 9 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 9 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.2 cm at the widest, 2 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 3 cm across; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2.3 cm at the widest, 2 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2.8 cm at the widest, 4 cm long; 12 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 2.9 mm deep in front, a rounded back; about 28 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 50 %) -->

  1. Size before assembly: about 2.8 cm at the widest, 4 cm long; 12 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 2.9 mm deep in front, a rounded back; about 28 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 50 %) --> Bend ≈ 60° around round 7<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's left on the finished toy (on the piece: in round 7, 4 st from the centre front line, toward the toy's left <!-- st 3.93 left -->). On the inner side draw rounds 6 and 9 together (3 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 4 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 2.8 cm at the widest, 2.8 cm long; 10 rounds.
  2. Change to pink (pull it through on the last yarn-over of R4).
  3. Change to white (pull it through on the last yarn-over of R5).
  4. Change to pink (pull it through on the last yarn-over of R7).
  5. Change to yellow (pull it through on the last yarn-over of R8).
  6. → Start stuffing (firmly) and keep adding as you decrease.
  7. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eye with a printed glint 15 mm (on the eye bump) (2: one on each eye bump; the left one is described, the right is its mirror): between rounds 4 and 5, on the centre front line.
  • Embroidery in dark green thread (on the body), straight stitches through: (in round 18, 5 st from the centre front line, toward the toy's right ) → (in round 18, 2.5 st from the centre front line, toward the toy's right ) → (in round 18, on the centre front line ) → (in round 18, 2.5 st from the centre front line, toward the toy's left ) → (in round 18, 5 st from the centre front line, toward the toy's left ).
  • Embroidery in dark green thread (on the eye bump) (2: one on each eye bump; the left one is described, the right is its mirror), straight stitches through: (in round 2, 1.5 st from the centre front line, toward the toy's right ) → (in round 2, 1 st from the centre front line, toward the toy's right ) → (in round 2, on the centre front line) → (in round 2, 1 st from the centre front line, toward the toy's left ) → (in round 2, 1.5 st from the centre front line, toward the toy's left ).
  • Strap (on the body): with light pink, ch 16 (≈ 4.7 cm); for a firmer strap sl st back along it. Sew it along (in round 27, 6.5 st from the centre front line, toward the toy's left ) → (between rounds 29 and 30, 2 st from the centre front line, toward the toy's left) → (in round 30, on the centre front line ) → (between rounds 29 and 30, 2 st from the centre front line, toward the toy's right) → (in round 27, 6.5 st from the centre front line, toward the toy's right ), catching it every 2–3 ch.

Abréviations

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet