amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Little Goat with a Bell modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 131 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
3/3
Temps
~5 h
Taille
12.4 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A free crochet goat pattern for a sweet sitting goat kid in creamy white with a long gentle face and a little chin beard. This amigurumi goat has sand-colored horns that curve back, long tan ears that stick out sideways, small brown hooves and a gold bell on a thin red cord. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook, ends up about 12 cm (5 in) tall and has safety eyes, with the muzzle, horns, ears, legs, beard and bell sewn on. The page gives a row-by-row pattern with stitch counts and an interactive 3D model to check every piece, a cozy gift for the Year of the Goat.

Comment crocheter Little Goat with a Bell

Avancé · 12 cm de haut · environ 5 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 20 pièces en rangs : Body, Head, Muzzle, Ear ×2, Inner ear ×2, Horn ×2, Front leg with hoof ×2, Haunch (applique) ×2, Hind leg with hoof ×2, Tail with ball tip, Cheek ×2, Bell, Beard (131 rangs au total).
  2. Rembourrez et assemblez en 13 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 15 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 96

  1. Size before assembly: about 7.9 cm at the widest, 4.8 cm long; 18 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 7.6 cm at the widest, 6.5 cm long; 26 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 4 × 2.8 cm at the widest, 3.8 cm long; 11 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs vertically, top to bottom; the starting chain is at the front of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns.
  2. With pale beige: ch 5.
  3. Change to cream (pull it through on the last yarn-over of R2).
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.7 cm at the widest, 4.8 cm long; 14 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 1.6 mm deep in front, a rounded back; about 17 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) -->

  1. A flat oval about 4.2 × 2.2 cm; 3 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With light pink: ch 7.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2.1 cm at the widest, 3.9 cm long; 11 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 100° around round 8<!-- the bend spreads over 5 rounds -->. After stuffing, bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 8, 0.5 st from the centre back line, toward the toy's left <!-- st 0.29 left -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 6 to round 10, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 4 rounds) and fasten off inside. Bend the second piece as a mirror image.

  1. Size before assembly: about 2 cm at the widest, 4.1 cm long; 12 rounds.
  2. Change to cream (pull it through on the last yarn-over of R3).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 35° around round 5<!-- the bend spreads over 2 rounds -->. After stuffing, bend the piece so the inner side of the bend faces forward on the finished toy (on the piece: in round 5, on the centre front line). On the inner side draw rounds 4 and 6 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 4 st, pull to the angle and hide the end inside. Bend the second piece as a mirror image.

  1. A flat circle about 3.8 cm across; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2.4 cm at the widest, 2.8 cm long; 9 rounds.
  2. Change to cream (pull it through on the last yarn-over of R3).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.2 cm at the widest, 3.1 cm long; 9 rounds.
  2. Change to cream (pull it through on the last yarn-over of R5).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.5 cm at the widest, 1.7 cm long; 5 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.3 cm at the widest, 1.9 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the Head): in round 13, 9 st apart (count along round 13: about 4.5 st each side of the centre front line).
  • Satin stitch (on the Muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image): in dusty rose thread, a oval about 2.6 mm wide and 4 mm tall, horizontal stitches; centred in round 2, 1.5 st from the centre top line, toward the toy's left .
  • Embroidery in chocolate thread (on the Muzzle), straight stitches through: (in round 2, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, on the centre bottom line ) → (in round 2, 1 st from the centre bottom line, toward the toy's right ).
  • Strap (on the Body) (2, symmetric: the toy's left side is described, the right is its mirror image): with red, ch 38 (≈ 11.3 cm); for a firmer strap sl st back along it. Sew it along (between rounds 16 and 17, on the centre front line ) → (between rounds 16 and 17, 7 st from the centre front line, toward the toy's left ) → (between rounds 16 and 17, 13.5 st from the centre front line, toward the toy's left ) → (between rounds 16 and 17, 7 st from the centre back line, toward the toy's left ) → (between rounds 16 and 17, on the centre back line ), catching it every 2–3 ch.
  • Strap (on the Body): with red, ch 11 (≈ 3 cm); for a firmer strap sl st back along it. Sew it along (between rounds 16 and 17, on the centre front line ) → (in round 13, on the centre front line) → (between rounds 9 and 10, on the centre front line ), catching it every 2–3 ch.

Body · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done