amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Goat on a Rock modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 135 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
3/3
Temps
~5 h
Taille
21 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet goat pattern: a Goat on a Rock amigurumi, about 21 cm tall in DK yarn with a 2.5 mm hook. It is a proud white goat with long dark horns, a small beard, a determined frown and amber eyes, standing on a grey rock. You need about 160 m of yarn: 75 m white, 40 m grey, 15 m light grey, 10 m dark grey, 5 m charcoal, 5 m beige, 5 m slate grey and 5 m blush pink. Plan on roughly 5 hours. A nice present for hikers and mountain lovers, or a brave little figure for a bookshelf. Spin the 3D model and follow the round-by-round pattern as you crochet.

Comment crocheter Goat on a Rock

Avancé · 21 cm de haut · environ 5 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 15 pièces en rangs : Body, Head, Ear ×2, Horn ×2, Beard, Cheek ×2, Leg with hoof ×4, Tail, Rock (135 rangs au total).
  2. Rembourrez et assemblez en 10 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 13 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 104

  1. Size before assembly: about 6.8 cm at the widest, 7 cm long; 26 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Press the piece flat to about 6.1 cm thick (oval cross-section).<!-- press the piece flat by 10 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 7.5 cm at the widest, 6.2 cm long; 25 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.2 cm at the widest, 3.6 cm long; 11 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 2.1 mm deep in front, a rounded back; about 22 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) -->

  1. Size before assembly: about 1.8 cm at the widest, 6.1 cm long; 17 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 100° around round 6<!-- the bend spreads over 9 rounds -->. After stuffing, bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 6, 0.5 st from the centre back line, toward the toy's left <!-- st 0.27 left -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 4 to round 8, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 4 rounds) and fasten off inside. Bend the second piece as a mirror image.

  1. Size before assembly: about 0.8 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Of these: front — 2 (left and right); hind — 2 (left and right). Size before assembly: about 1.9 cm at the widest, 4.2 cm long; 12 rounds.
  2. Change to white (pull it through on the last yarn-over of R3).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 0.9 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 11.3 cm at the widest, 6.5 cm long; 32 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Change to grey (pull it through on the last yarn-over of R12).
  3. → Start stuffing (firmly) and keep adding as you decrease.
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Felt (amber), 2 ovals 11×10 mm (on the head) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: between rounds 14 and 15, 4.5 st from the centre front line, toward the toy's left .
  • Satin stitch (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image): in black thread in several layers so it stands out, a oval about 7 mm wide and 2.4 mm tall, horizontal stitches; centred between rounds 14 and 15, 4.5 st from the centre front line, toward the toy's left .
  • Embroidery in brown thread (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 12 and 13, 6.5 st from the centre front line, toward the toy's left ) → (between rounds 12 and 13, 5 st from the centre front line, toward the toy's left ) → (in round 13, 3.5 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the head): in nose brown thread, a oval about 6.5 mm wide and 4 mm tall, horizontal stitches; centred in round 18, on the centre front line .
  • Embroidery in brown thread (on the head), straight stitches through: (between rounds 19 and 20, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 19 and 20, 0.5 st from the centre front line, toward the toy's right ) → (in round 20, on the centre front line ) → (between rounds 19 and 20, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 19 and 20, 1.5 st from the centre front line, toward the toy's left ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done