amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Fantastique

Santa Stuck in a Chimney modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 51 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesFantastique

Difficulté
1/3
Temps
~2 h
Taille
13.9 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet santa pattern: a Santa Stuck in a Chimney amigurumi, about 14 cm tall in DK yarn with a 2.5 mm hook. A brick chimney with a surprised little face and snow on top, while Santa's red legs and black boots kick out of it. You need about 70 m of yarn: 20 m brick, 15 m white, 15 m red, 10 m black and 10 m grey. Plan on roughly 2 hours. Hang it by the fireplace as a Christmas joke, or give it to anyone who loves a funny holiday decoration. Spin the 3D model and follow the round-by-round pattern.

Comment crocheter Santa Stuck in a Chimney

Pour débutants · 14 cm de haut · environ 2 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 3 pièces en rangs : Brick chimney, Santa leg ×2 (51 rangs au total).
  2. Rembourrez et assemblez en 3 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 10 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 34

  1. Size before assembly: about 7.7 cm at the widest, 8.3 cm long; 31 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Change to grey (pull it through on the last yarn-over of R12).
  3. Change to grey (pull it through on the last yarn-over of R15).
  4. Change to grey (pull it through on the last yarn-over of R18).
  5. Change to grey (pull it through on the last yarn-over of R21).
  6. Change to white (pull it through on the last yarn-over of R22).
  7. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  8. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 3.3 × 2.1 cm at the widest, 7 cm long; 20 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs front to back; the starting chain is at the top of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns.
  2. With black: ch 5.
  3. Change to white (pull it through on the last yarn-over of R8).
  4. Change to red (pull it through on the last yarn-over of R10).
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 85° around round 9<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces forward on the finished toy (on the piece: in round 9, 1 st from the centre front line, toward the toy's left <!-- st 1.09 left -->). On the inner side draw rounds 8 and 11 together (3 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 4 st, pull to the angle and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 13 mm (on the brick chimney): between rounds 16 and 17, 8 st apart (count along round 16: about 3.9 st each side of the centre front line).
  • Satin stitch (on the brick chimney): in black thread, a oval about 8 mm wide and 10 mm tall, horizontal stitches; centred in round 14, on the centre front line .
  • Blush about 10 mm, dry pastel or blush (on the brick chimney, both sides): between rounds 14 and 15, 7 st from the centre front line, toward the toy's left . Colour pink.

Brick chimney · R1–R5

MR××××××VVVVVV×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done