amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Fantastique

Winking Heart Pair modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 104 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesFantastique

Difficulté
3/3
Temps
~4 h
Taille
9.4 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet hearts pattern: a Winking Heart Pair amigurumi, about 9 cm tall in DK yarn with a 2.5 mm hook. It is a red heart with a wink and a pink heart with a bow, standing close and holding tiny hands, both blushing. You need about 120 m of yarn: 60 m red, 55 m pink and 5 m hot pink. Plan on roughly 4 hours. A sweet Valentine gift for a couple or a desk shelf pair for anyone who loves hearts. Spin the 3D model and follow the round-by-round pattern.

Comment crocheter Winking Heart Pair

Avancé · 9 cm de haut · environ 4 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 17 pièces en rangs : Red heart, Pink heart, Red heart lobe ×2, Pink heart lobe ×2, Red arm ×2, Pink arm ×2, Cheek ×2, Cheek ×2, Bow loop ×2, Bow knot (104 rangs au total).
  2. Rembourrez et assemblez en 13 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 8 prêts

Dans le même genre

Tout dans fantastique →
  • Aperçu de Green Dino with a Red Saddle
    Générateur
    CrocheterRemix

    Green Dino with a Red Saddle

    par le générateur de modèles

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 88

  1. Size before assembly: about 7.8 cm at the widest, 7.3 cm long; 26 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Press the piece flat to about 5.5 cm thick (oval cross-section).<!-- press the piece flat by 30 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 12 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 7.8 cm at the widest, 7.3 cm long; 26 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Press the piece flat to about 5.5 cm thick (oval cross-section).<!-- press the piece flat by 30 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 12 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 4.8 cm at the widest, 3.5 cm long; 15 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Press the piece flat to about 3.7 cm thick (oval cross-section).<!-- press the piece flat by 22 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 4.8 cm at the widest, 3.5 cm long; 15 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Press the piece flat to about 3.7 cm thick (oval cross-section).<!-- press the piece flat by 22 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.2 cm at the widest, 1.7 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.2 cm at the widest, 1.7 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.4 cm at the widest, 1.7 cm long; 5 rounds.
  2. → This piece is not stuffed.
  3. Press the piece flat to about 6 mm thick (oval cross-section).<!-- press the piece flat by 55 % --> Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 0.9 cm at the widest, 1.1 cm long; 3 rounds.
  2. → This piece is not stuffed.
  3. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 5 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eye with a printed glint 12 mm (on the red heart): between rounds 19 and 20, 4 st from the centre front line, toward the toy's left .
  • Embroidery in dark brown thread (on the red heart), straight stitches through: (between rounds 19 and 20, 5.5 st from the centre front line, toward the toy's right ) → (in round 20, 4.5 st from the centre front line, toward the toy's right ) → (in round 20, 3.5 st from the centre front line, toward the toy's right ) → (between rounds 19 and 20, 2.5 st from the centre front line, toward the toy's right ).
  • Satin stitch (on the red heart): in dark brown thread, a triangle about 9 mm wide and 5.5 mm tall, horizontal stitches; centred between rounds 16 and 17, on the centre front line .
  • Embroidery in dark brown thread (on the pink heart) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 19 and 20, 2.5 st from the centre front line, toward the toy's left ) → (in round 20, 3.5 st from the centre front line, toward the toy's left ) → (in round 20, 4.5 st from the centre front line, toward the toy's left ) → (between rounds 19 and 20, 5.5 st from the centre front line, toward the toy's left ).
  • Embroidery in dark brown thread (on the pink heart), straight stitches through: (in round 17, 1.5 st from the centre front line, toward the toy's right ) → (in round 16, 0.5 st from the centre front line, toward the toy's right ) → (in round 16, on the centre front line) → (in round 16, 0.5 st from the centre front line, toward the toy's left ) → (in round 17, 1.5 st from the centre front line, toward the toy's left ).

Abréviations

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Big Grey Forest Spirit
    Générateur
    CrocheterRemix

    Big Grey Forest Spirit

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Black Baby Dragon
    Générateur
    CrocheterRemix

    Black Baby Dragon

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Blue Alien with Big Ears
    Générateur
    CrocheterRemix

    Blue Alien with Big Ears

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Little Spider Hero
    Générateur
    CrocheterRemix

    Little Spider Hero

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Sleepy Big Belly Bear
    Générateur
    CrocheterRemix

    Sleepy Big Belly Bear

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Little Green Ogre
    Générateur
    CrocheterRemix

    Little Green Ogre

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Burlap Sack Doll
    Générateur
    CrocheterRemix

    Burlap Sack Doll

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Happy Snowman with Twig Arms
    Générateur
    CrocheterRemix

    Happy Snowman with Twig Arms

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Yellow Capsule Helper
    Générateur
    CrocheterRemix

    Yellow Capsule Helper

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Ghost in a Mouse Costume
    Générateur
    CrocheterRemix

    Ghost in a Mouse Costume

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Pirate Boy in a Straw Hat
    Générateur
    CrocheterRemix

    Pirate Boy in a Straw Hat

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0