amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Hedgehog in a Scarf Ornament modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 17 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
1/3
Temps
~2 h
Taille
8.2 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet hedgehog ornament pattern: a Hedgehog in a Scarf Ornament amigurumi, about 8 cm tall in DK yarn with a 2.5 mm hook. A round brown hedgehog with bobble spines has a cream face with rosy cheeks and a cosy red and white striped scarf with a little tail. You need about 45 m of yarn: 15 m brown, 10 m cream, 10 m red, 5 m white and 5 m pink. Plan on roughly 2 hours. Hang it on the tree or on a gift ribbon, or keep it on a shelf as a winter desk buddy for hedgehog lovers. Spin the 3D model and follow the round-by-round pattern to match every stripe.

Comment crocheter Hedgehog in a Scarf Ornament

Pour débutants · 8 cm de haut · environ 2 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 9 pièces en rangs : Hedgehog body, Ear ×2, Foot ×2, Cheek ×2, Scarf end, Hanging loop (40 rangs au total).
  2. Rembourrez et assemblez en 6 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 10 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 37

  1. Size before assembly: about 5.9 cm at the widest, 6.6 cm long; 23 rounds.
  2. Change to red (pull it through on the last yarn-over of R13).
  3. Change to white (pull it through on the last yarn-over of R14).
  4. Change to red (pull it through on the last yarn-over of R15).
  5. Change to cream (pull it through on the last yarn-over of R16).
  6. → Insert the safety eyes and the safety nose now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  7. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1 cm at the widest, 1.2 cm long; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 50 % -->

  1. Size before assembly: about 1.1 cm at the widest, 0.9 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.<!-- flattened 50 % -->

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: an oval about 1.3 × 0.5 cm at the widest, 2.1 cm long; 6 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the bottom of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With red: ch 4.
  3. Change to white (pull it through on the last yarn-over of R2).
  4. Change to red (pull it through on the last yarn-over of R3).
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 90 % -->

  1. Size before assembly: about 2 cm at the widest, 0.7 cm long; 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in red (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 9 mm (on the hedgehog body): between rounds 19 and 20, 5 st apart (count along round 19: about 2.7 st each side of the centre top line).
  • Safety nose, oval, 6×4.5 mm (on the hedgehog body): between rounds 22 and 23, on the centre bottom line .
  • Embroidery in dark brown thread (on the hedgehog body) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 21 and 22, on the centre bottom line ) → (in round 21, 0.5 st from the centre bottom line, toward the toy's left ) → (in round 21, 1 st from the centre bottom line, toward the toy's left ).

Hedgehog body · R1–R5

MR××××××VVVVVV×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done