amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Hen in Rain Boots modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 72 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
2/3
Temps
~3 h
Taille
12.7 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

This free crochet chicken pattern makes a chubby amigurumi hen standing in a pair of little red rain boots. She is soft white with a red comb, rosy cheeks, cream wings and a tiny yellow flower, and the yellow-cuffed boots with dark red soles make this hen plushie stand on her own. She is about 12.7 cm (5 in) tall, worked in the round in single crochet with DK yarn and a 2.5 mm hook, with safety eyes, a three-lobe comb, flat wing motifs and boots started from a chain oval. The page gives a row-by-row pattern with stitch counts and an interactive 3D model to check where every piece is sewn.

Comment crocheter Hen in Rain Boots

Intermédiaire · 13 cm de haut · environ 3 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 15 pièces en rangs : Body, Big comb lobe, Small comb lobe ×2, Beak, Wattle, Wing ×2, Tail, Boot ×2, Cheek ×2, Flower, Flower centre (80 rangs au total).
  2. Rembourrez et assemblez en 12 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 14 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 69

  1. Size before assembly: about 9.2 cm at the widest, 7.9 cm long; 31 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.6 cm at the widest, 1.9 cm long; 6 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Press the piece flat to about 1.1 cm thick (oval cross-section).<!-- press the piece flat by 30 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Of these: front — 1; back — 1. Size before assembly: about 1.4 cm at the widest, 1.2 cm long; 4 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Press the piece flat to about 10 mm thick (oval cross-section).<!-- press the piece flat by 30 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.3 cm at the widest, 1.2 cm long; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.1 cm at the widest, 1.1 cm long; 3 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Flat motif — half circle (worked in turned rows, one layer of fabric), about 2.5 × 4.5 cm; 6 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. Size before assembly: about 2.1 cm at the widest, 2.2 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 45 %).

  1. Size before assembly: an oval about 4.6 × 3.4 cm at the widest, 3.4 cm long; 13 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs front to back; the starting chain is at the bottom of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns.
  2. With sole: ch 5.
  3. Change to boot (pull it through on the last yarn-over of R4).
  4. Change to cuff (pull it through on the last yarn-over of R11).
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Flat motif — lobed (lobes round a magic ring, worked in rounds, one layer of fabric), about 2.3 × 2.4 cm; 2 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 13 mm (on the body): in round 22, 7 st apart (count along round 22: about 3.6 st each side of the centre front line).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done