amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Plantes

Monstera Monster modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 60 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesPlantes

Difficulté
1/3
Temps
~4 h
Taille
14.8 cm
Bizarrerie
2/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet plant pattern: a Monstera Monster amigurumi, about 15 cm tall in DK yarn with a 2.5 mm hook. A terracotta pot with a goofy face, two mismatched googly eyes, a wide red grin with a single white fang and pink cheeks holds three big green monstera leaves. You need about 105 m of yarn: 35 m green, 30 m terracotta, 10 m dark green, 10 m dark terracotta, 10 m brown, 5 m white and 5 m pink. Plan on roughly 4 hours. It is a funny desk plant that never needs watering, a good gift for plant lovers and for anyone who likes friendly monsters. You can spin the 3D model and follow the round-by-round pattern.

Comment crocheter Monstera Monster

Pour débutants · 15 cm de haut · environ 4 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 8 pièces en rangs : Pot, Leaf ×3, Cheek ×2, Eye white ×2 (60 rangs au total).
  2. Rembourrez et assemblez en 7 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 12 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 44

  1. Size before assembly: about 8.5 cm at the widest, 7.2 cm long; 29 rounds.
  2. Change to dark terracotta (pull it through on the last yarn-over of R20).
  3. Change to brown (pull it through on the last yarn-over of R23).
  4. → Start stuffing (firmly) and keep adding as you decrease.
  5. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 4.7 cm at the widest, 7.8 cm long; 26 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 7 mm thick.<!-- flattened 85 % -->

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Of these: big — 1; small — 1. A flat circle about 2.3 cm across; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eye with a printed glint 10 mm (on the big eye white): in round 1, on the centre top line.
  • Safety eye with a printed glint 7 mm (on the small eye white): in round 1, on the centre top line.
  • Embroidery in dark red thread (on the pot), straight stitches through: (between rounds 15 and 16, 8.5 st from the centre front line, toward the toy's right ) → (between rounds 14 and 15, 6 st from the centre front line, toward the toy's right ) → (between rounds 13 and 14, 3.5 st from the centre front line, toward the toy's right ) → (between rounds 13 and 14, 1 st from the centre front line, toward the toy's right ) → (between rounds 13 and 14, 1.5 st from the centre front line, toward the toy's left ) → (in round 13, 3.5 st from the centre front line, toward the toy's left ) → (between rounds 13 and 14, 6 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the pot): in white thread in several layers so it stands out, a triangle about 7 mm wide and 9 mm tall, horizontal stitches, turned 180° clockwise (looking at that surface); centred between rounds 12 and 13, 2 st from the centre front line, toward the toy's left .
  • Embroidery in light green thread (on the no. 1 leaf), straight stitches through: (in round 2, on the centre front line) → (in round 7, on the centre front line) → (in round 12, on the centre front line) → (in round 16, on the centre front line).
  • Embroidery in light green thread (on the no. 2 leaf), straight stitches through: (in round 2, on the centre front line) → (in round 7, on the centre front line) → (in round 12, on the centre front line) → (in round 16, on the centre front line).
  • Embroidery in light green thread (on the no. 3 leaf), straight stitches through: (in round 2, on the centre front line) → (in round 7, on the centre front line) → (in round 12, on the centre front line) → (in round 16, on the centre front line).

Pot · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done