amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Leggy Chicken in Sneakers modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 106 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
3/3
Temps
~4 h
Taille
18.8 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet chicken pattern for a leggy amigurumi hen: a round egg-shaped body perched on long striped legs in tiny red sneakers. About 19 cm tall in DK yarn with a 2.5 mm hook, roughly 4 hours of work. She stares straight ahead with a perfectly blank face, as if she just walked into the wrong room. The body, comb, beak and wings are simple rounds; the legs are worked as long tubes with yellow and red stripes, and each sneaker gets a white sole and toe cap. A funny crochet gift for chicken lovers, a desk buddy, or a starting point for your own leggy toys. Spin the 3D model to see every piece, then follow the round-by-round pattern.

Comment crocheter Leggy Chicken in Sneakers

Avancé · 19 cm de haut · environ 4 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 14 pièces en rangs : Body, Comb center, Comb side ×2, Beak, Wing ×2, Tail feather ×3, Leg ×2, Sneaker ×2 (106 rangs au total).
  2. Rembourrez et assemblez en 12 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 9 prêts

RemixCrocheter

Échantillon

1 sc ≈ 3.8 mm wide, 1 round ≈ 3.4 mm tall (10 cm ≈ 26 sc × 29 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 72

  1. Size before assembly: about 9 cm at the widest, 10.9 cm long; 39 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.3 cm at the widest, 2.2 cm long; 8 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 45 %).

  1. Of these: front — 1; back — 1. Size before assembly: about 1.9 cm at the widest, 2 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 45 %).

  1. Size before assembly: about 1.4 cm at the widest, 1.8 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.6 cm at the widest, 3.1 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 1.3 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 16 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 40 %) -->

  1. Of these: mid — 1; top — 1; no. 3 — 1. Size before assembly: about 1.3 cm at the widest, 1.8 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 40 %).

  1. Size before assembly: about 2.1 cm at the widest, 6.5 cm long; 19 rounds.
  2. Change to red (pull it through on the last yarn-over of R2).
  3. Change to yellow (pull it through on the last yarn-over of R4).
  4. Change to red (pull it through on the last yarn-over of R6).
  5. Change to yellow (pull it through on the last yarn-over of R8).
  6. Change to red (pull it through on the last yarn-over of R11).
  7. Change to yellow (pull it through on the last yarn-over of R13).
  8. Change to red (pull it through on the last yarn-over of R15).
  9. Change to yellow (pull it through on the last yarn-over of R17).
  10. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Of these: no. 1 — 1; right — 1. Size before assembly: an oval about 2.4 × 1.3 cm at the widest, 3.7 cm long; 11 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With white: ch 5.
  3. Change to red (pull it through on the last yarn-over of R3).
  4. → Start stuffing (firmly) and keep adding as you decrease.
  5. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 9 mm (on the body): in round 24, 10 st apart (count along round 24: about 5.2 st each side of the centre front line).
  • Embroidery in pink thread (on the body) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 21, 4.5 st from the centre front line, toward the toy's left ) → (in round 21, 6.5 st from the centre front line, toward the toy's left ).
  • Embroidery in white thread (on the sneaker), straight stitches through: (in round 6, 1 st from the centre top line, toward the toy's right ) → (in round 8, 0.5 st from the centre top line, toward the toy's left ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done