amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Mini Duck Keychain modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 43 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
1/3
Temps
~2 h
Taille
4.4 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A free crochet duck keychain pattern for a tiny yellow duck with an orange bill, a small blue bow tie and a round chain loop on its head. This amigurumi duck has big shiny eyes, rosy cheeks, little wings and a perky tail, so it reads as a duck from every side of your bag. It is worked in the round in single crochet with fingering yarn and a 2 mm hook, head and body in one piece, and is about 4.5 cm (1.75 in) tall with the loop; the bill, wings, feet, bow and cheeks are sewn on. Follow the row-by-row pattern with stitch counts and rotate the interactive 3D model to check each piece.

Comment crocheter Mini Duck Keychain

Pour débutants · 4 cm de haut · environ 2 h · fil fingering · crochet de 2 mm

  1. Crochetez les 12 pièces en rangs : Head-body, Bill, Wing ×2, Webbed foot ×2, Cheek ×2, Bow loop ×2, Bow knot, Tail (43 rangs au total).
  2. Rembourrez et assemblez en 9 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 9 prêts

Dans le même genre

Tous les modèles d’amigurumi canard →Tout dans animaux →
  • Aperçu de Winnie-the-Pooh with a Honey Pot
    Générateur
    CrocheterRemix

    Winnie-the-Pooh with a Honey Pot

    par le générateur de modèles

RemixCrocheter

Échantillon

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 40

  1. Size before assembly: about 4.1 cm at the widest, 4.3 cm long; 21 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 1.7 × 0.8 cm at the widest, 0.7 cm long; 3 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With orange: ch 5.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 45 %).

  1. A flat oval about 2.2 × 1.6 cm; 3 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running front to back. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With sunny yellow: ch 4.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: an oval about 1.4 × 0.8 cm at the widest, 0.7 cm long; 3 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With orange: ch 4.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 85 % -->

  1. A flat circle about 1 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 0.7 cm at the widest, 1 cm long; 4 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Press the piece flat to about 3 mm thick (oval cross-section).<!-- press the piece flat by 55 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 5 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 0.6 cm at the widest, 0.8 cm long; 3 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 4 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 0.9 cm at the widest, 0.9 cm long; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 45 %).

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 6 mm (on the head-body): between rounds 7 and 8, 6 st apart (count along round 7: about 2.9 st each side of the centre front line).

Head-body · R1–R5

MR××××××VVVVVV×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Tigger the Bouncy Tiger
    Générateur
    CrocheterRemix

    Tigger the Bouncy Tiger

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Speedy Blue Hedgehog
    Générateur
    CrocheterRemix

    Speedy Blue Hedgehog

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de White Beagle with Black Ears
    Générateur
    CrocheterRemix

    White Beagle with Black Ears

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Grey Tabby Loaf Cat
    Générateur
    CrocheterRemix

    Grey Tabby Loaf Cat

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Confused Yellow Duck
    Générateur
    CrocheterRemix

    Confused Yellow Duck

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Pudding Puppy in a Beret
    Générateur
    CrocheterRemix

    Pudding Puppy in a Beret

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Electric Yellow Mouse
    Générateur
    CrocheterRemix

    Electric Yellow Mouse

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Piglet in a Green Jumper
    Générateur
    CrocheterRemix

    Piglet in a Green Jumper

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Peter Rabbit in a Blue Jacket
    Générateur
    CrocheterRemix

    Peter Rabbit in a Blue Jacket

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Bunny in a Pink Hood
    Générateur
    CrocheterRemix

    Bunny in a Pink Hood

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Simple White Bunny in a Dress
    Générateur
    CrocheterRemix

    Simple White Bunny in a Dress

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done