amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Plantes

Monstera in a Pot with a Cat modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 90 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesPlantes

Difficulté
2/3
Temps
~4 h
Taille
14.7 cm
Bizarrerie
2/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet monstera pattern: a Monstera in a Pot with a Cat amigurumi, about 15 cm tall in DK yarn with a 2.5 mm hook. Three big veined green leaves rise from a terracotta pot with a cream stripe, and a ginger tabby cat peeks over the rim with its paws on the edge and a small pink nose. You need about 125 m of yarn: 35 m green, 30 m terracotta, 30 m orange, 10 m dark green, 10 m cream and 10 m brown. Plan on roughly 4 hours. It suits plant lovers and cat people alike as a housewarming present or a desk companion that never needs watering. Turn the 3D model around to see the cat from every side and follow the round-by-round pattern.

Comment crocheter Monstera in a Pot with a Cat

Intermédiaire · 15 cm de haut · environ 4 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 10 pièces en rangs : Pot, Leaf ×3, Cat head, Ear ×2, Muzzle patch, Paw ×2 (90 rangs au total).
  2. Rembourrez et assemblez en 8 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 11 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 67

  1. Size before assembly: about 8.5 cm at the widest, 7.2 cm long; 29 rounds.
  2. Change to cream (pull it through on the last yarn-over of R17).
  3. Change to terracotta (pull it through on the last yarn-over of R20).
  4. Change to brown (pull it through on the last yarn-over of R23).
  5. → Start stuffing (firmly) and keep adding as you decrease.
  6. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 4.7 cm at the widest, 7.8 cm long; 26 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 7 mm thick.<!-- flattened 85 % -->

  1. Size before assembly: about 5.7 cm at the widest, 4.8 cm long; 20 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (moderately) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.8 cm at the widest, 2.2 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 2.1 mm deep in front, a rounded back; about 28 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 35 %) -->

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.6 cm at the widest, 1.9 cm long; 6 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the cat head): in round 11, 7 st apart (count along round 11: about 3.5 st each side of the centre front line).
  • Embroidery in dark brown thread (on the cat head), straight stitches through: (between rounds 8 and 9, 1.5 st from the centre front line, toward the toy's right ) → (in round 8, 1 st from the centre front line, toward the toy's right ) → (between rounds 8 and 9, on the centre front line).
  • Embroidery in dark brown thread (on the cat head), straight stitches through: (between rounds 8 and 9, 1.5 st from the centre front line, toward the toy's left ) → (in round 8, 1 st from the centre front line, toward the toy's left ) → (between rounds 8 and 9, on the centre front line).
  • Embroidery in dark orange thread (on the cat head), straight stitches through: (in round 17, on the centre front line ) → (between rounds 18 and 19, on the centre front line ).
  • Embroidery in dark orange thread (on the cat head), straight stitches through: (in round 17, 0.5 st from the centre front line, toward the toy's right ) → (in round 18, 0.5 st from the centre front line, toward the toy's right ).
  • Embroidery in dark orange thread (on the cat head), straight stitches through: (in round 17, 0.5 st from the centre front line, toward the toy's left ) → (in round 18, 0.5 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the cat head): in pink thread, a oval about 5 mm wide and 3.5 mm tall, horizontal stitches; centred between rounds 9 and 10, on the centre front line .

Pot · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done