amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Nourriture

Orange Soda Bottle modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 64 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesNourriture

Difficulté
1/3
Temps
~3 h
Taille
15.8 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

This free crochet soda bottle pattern makes a happy orange soda amigurumi standing on two stubby legs with little arms held out for a hug. The bottle is worked in one piece from the flat base up through rounded shoulders and a narrow neck to a bright green cap with a crisp back-loop edge. A white label with an orange-and-leaf applique, big 15 mm safety eyes with lashes, pink cheeks and white felt shine marks finish the look. Made in single crochet with DK yarn and a 2.5 mm hook, it is about 16 cm (6 in) tall. Follow the rows with stitch counts and turn the 3D model to place every piece.

Comment crocheter Orange Soda Bottle

Pour débutants · 16 cm de haut · environ 3 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 9 pièces en rangs : Bottle, Leg ×2, Arm ×2, Orange, Leaf, Cheek ×2 (65 rangs au total).
  2. Rembourrez et assemblez en 7 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 9 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 34

  1. Size before assembly: about 6.8 cm at the widest, 14.1 cm long; 43 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Change to green (pull it through on the last yarn-over of R35).
  4. Press the piece flat to about 6 cm thick (oval cross-section).<!-- press the piece flat by 12 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.4 cm at the widest, 2.5 cm long; 8 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.3 cm at the widest, 3.1 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 2.3 cm across; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Flat motif — leaf (pointed leaf, worked in rounds, one layer of fabric), about 1.7 × 0.9 cm; 1 row.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. A flat circle about 0.8 cm across; 1 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 15 mm (on the bottle): in round 23, 7 st apart (count along round 23: about 3.6 st each side of the centre front line).
  • Embroidery in black thread (on the bottle), straight stitches through: (between rounds 22 and 23, 1 st from the centre front line, toward the toy's right ) → (in round 22, 0.5 st from the centre front line, toward the toy's right ) → (in round 22, on the centre front line ) → (in round 22, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 22 and 23, 1 st from the centre front line, toward the toy's left ).
  • Embroidery in black thread (on the bottle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 24 and 25, 4.5 st from the centre front line, toward the toy's left ) → (in round 25, 5 st from the centre front line, toward the toy's left ).
  • Embroidery in black thread (on the bottle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 23 and 24, 5 st from the centre front line, toward the toy's left ) → (in round 24, 5.5 st from the centre front line, toward the toy's left ).
  • Felt (white), 2 ovals 8×2.4 mm, tilted 60° anticlockwise (on the bottle) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: in round 30, 5.5 st from the centre front line, toward the toy's left .
  • Felt (white), 2 ovals 8×2.4 mm, tilted 60° anticlockwise (on the bottle) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: between rounds 30 and 31, 6 st from the centre front line, toward the toy's left .
  • Felt (white), 2 ovals 8×2.4 mm, tilted 39° anticlockwise (on the bottle) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: in round 11, 8.5 st from the centre front line, toward the toy's left .
  • Felt (white), 2 ovals 8×2.4 mm, tilted 120° anticlockwise (on the bottle) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: in round 30, 5.5 st from the centre back line, toward the toy's left .
  • Felt (white), 2 ovals 8×2.4 mm, tilted 120° anticlockwise (on the bottle) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: between rounds 30 and 31, 4.5 st from the centre back line, toward the toy's left .
  • Felt (white), 2 ovals 8×2.4 mm, tilted 141° anticlockwise (on the bottle) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: in round 11, 15.5 st from the centre front line, toward the toy's left .

Bottle · R1–R5

MR××××××VVVVVV×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done