amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Fantastique

Jingle Bell Ornament modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 45 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesFantastique

Difficulté
1/3
Temps
~2 h
Taille
8.2 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A free crochet christmas bell pattern for a smiling golden amigurumi bell ornament with a red bow and a holly sprig. This jingle bell plushie has a darker gold rim, rosy cheeks, a little clapper ball peeking out below and a gold hanging loop standing above the bow. It is worked in the round in single crochet with fingering yarn and a 2 mm hook and is about 8 cm (3.2 in) tall including the loop; the bow, holly leaves, berries and clapper are sewn on and the face is embroidered. Follow it row by row with stitch counts and turn the interactive 3D model to see where every piece goes, then hang it on the tree or tie it to a gift.

Comment crocheter Jingle Bell Ornament

Pour débutants · 8 cm de haut · environ 2 h · fil fingering · crochet de 2 mm

  1. Crochetez les 12 pièces en rangs : Bell, Bow knot, Bow loop ×2, Hanging loop, Clapper ball, Holly leaf ×2, Berry ×2, Cheek ×2 (46 rangs au total).
  2. Rembourrez et assemblez en 10 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 11 prêts

RemixCrocheter

Échantillon

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 37

  1. Size before assembly: about 5.4 cm at the widest, 5 cm long; 20 rounds.
  2. Change to antique gold (pull it through on the last yarn-over of R16).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.2 cm at the widest, 1.3 cm long; 5 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.8 cm at the widest, 1.7 cm long; 8 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Press the piece flat to about 8 mm thick (oval cross-section).<!-- press the piece flat by 55 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.5 cm at the widest (lies flat); 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in soft gold (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

  1. Size before assembly: about 1.6 cm at the widest, 1.2 cm long; 6 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Flat motif — leaf (pointed leaf, worked in rounds, one layer of fabric), about 2.5 × 0.8 cm; 1 row.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. A flat circle about 1.1 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 1 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Embroidered eyes (on the bell) (2, symmetric: the toy's left side is described, the right is its mirror image): in black thread, a oval about 5.4 mm wide and 6.6 mm tall, horizontal stitches; centred between rounds 11 and 12, 3 st from the centre front line, toward the toy's left .
  • Eye glint (on the bell) (2, symmetric: the toy's left side is described, the right is its mirror image): in snow white thread over the embroidered eye, a oval about 1.8 mm wide and 1.8 mm tall, horizontal stitches; centred between rounds 11 and 12, 3 st from the centre front line, toward the toy's left , then moved 1 mm to the right and 1.6 mm up (looking at the toy's face).
  • Embroidery in black thread (on the bell), straight stitches through: (in round 13, 1 st from the centre front line, toward the toy's right ) → (between rounds 13 and 14, 0.5 st from the centre front line, toward the toy's right ) → (in round 14, on the centre front line ) → (between rounds 13 and 14, 0.5 st from the centre front line, toward the toy's left ) → (in round 13, 1 st from the centre front line, toward the toy's left ).

Bell · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done