amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Capybara in a Santa Hat Ornament modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 60 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
1/3
Temps
~2 h
Taille
6.1 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A free crochet capybara pattern for a sleepy little ornament in a Santa hat, made to hang on the tree. This amigurumi capybara has closed happy eyes, a tan snout, tiny round ears and a small orange riding on its back, with a white pompom and a gold loop on the hat. It is worked in the round in single crochet with fingering yarn and a 2 mm hook, is about 6 cm (2.4 in) tall and 7 cm long, and has embroidered eyes, so it is safe for little hands. Follow it row by row with stitch counts and turn the interactive 3D model to see where every piece goes, a cozy gift for capybara fans.

Comment crocheter Capybara in a Santa Hat Ornament

Pour débutants · 6 cm de haut · environ 2 h · fil fingering · crochet de 2 mm

  1. Crochetez les 13 pièces en rangs : Head-body, Snout, Ear ×2, Foot ×2, Cheek ×2, Orange, Orange leaf, Santa hat, Pompom, Hanging loop (61 rangs au total).
  2. Rembourrez et assemblez en 10 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 14 prêts

RemixCrocheter

Échantillon

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 52

  1. Size before assembly: an oval about 5.6 × 3.5 cm at the widest, 4.1 cm long; 19 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs front to back; the starting chain is at the bottom of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns.
  2. With caramel: ch 9.
  3. → Start stuffing (firmly) and keep adding as you decrease.
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 2.6 × 1.7 cm at the widest, 1.4 cm long; 6 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With tan: ch 5.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.6 cm at the widest, 1.2 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a dish: rounds 1–2 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 1.8 mm at the centre) and turn rounds 3–5 to the back: they make a thick rounded rim (about 5.9 mm thick) and lie behind as a second layer; the piece is about 16 mm across.<!-- (dish 70 %) -->

  1. Size before assembly: about 0.8 cm at the widest, 0.7 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 1.1 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.7 cm at the widest, 1.4 cm long; 7 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Flat motif — leaf (pointed leaf, worked in rounds, one layer of fabric), about 1.6 × 0.8 cm; 1 row.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. Size before assembly: about 2.4 cm at the widest, 2.4 cm long; 10 rounds.
  2. Change to snow white (pull it through on the last yarn-over of R7).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Bend ≈ 35° around round 4<!-- the bend spreads over 3 rounds -->. Bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 4, on the centre back line). On the inner side draw rounds 4 and 5 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 4 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 1.1 cm at the widest, 1.6 cm long; 6 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.5 cm at the widest (lies flat); 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in soft gold (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Embroidery in chocolate thread (on the head-body) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 13, 3.5 st from the centre front line, toward the toy's left ) → (between rounds 12 and 13, 4 st from the centre front line, toward the toy's left ) → (between rounds 12 and 13, 5 st from the centre front line, toward the toy's left ) → (between rounds 12 and 13, 5.5 st from the centre front line, toward the toy's left ) → (in round 13, 6 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the snout): in chocolate thread, a oval about 5 mm wide and 2.8 mm tall, horizontal stitches; centred in round 1, on the centre top line .
  • Embroidery in chocolate thread (on the snout), straight stitches through: (in round 2, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 0.5 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, on the centre bottom line ) → (between rounds 2 and 3, 0.5 st from the centre bottom line, toward the toy's right ) → (in round 2, 1 st from the centre bottom line, toward the toy's right ).

Abréviations

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet