amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Penguin on a Tiny Iceberg modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 62 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
2/3
Temps
~3 h
Taille
8.2 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet penguin pattern: a Penguin on a Tiny Iceberg amigurumi, about 8 cm tall in DK yarn with a 2.5 mm hook. It is a small penguin with a worried face, rosy cheeks and a coral fish in its flipper, standing on a round white iceberg with light blue ice crags. You need about 85 m of yarn: 25 m white, 25 m black, 20 m light blue, 5 m coral, 5 m orange and 5 m pink. Plan on roughly 3 hours. Give it to someone who likes a dramatic little penguin, or keep it as a funny desk companion. Spin the 3D model and follow the round-by-round pattern, fish and ice included.

Comment crocheter Penguin on a Tiny Iceberg

Intermédiaire · 8 cm de haut · environ 3 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 14 pièces en rangs : Iceberg, Ice crag ×3, Penguin, Beak, Flipper ×2, Foot ×2, Cheek ×2, Fish, Fish tail (80 rangs au total).
  2. Rembourrez et assemblez en 12 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 11 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 68

  1. Size before assembly: about 7.4 cm at the widest, 2.3 cm long; 18 rounds.
  2. Change to white (pull it through on the last yarn-over of R6).
  3. → Start stuffing (firmly) and keep adding as you decrease.
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.1 cm at the widest, 3.1 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 6.7 cm at the widest, 6.2 cm long; 24 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. colours of round 1 in order: 1 sc in white, 3 sc in black, 2 sc in white
  3. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.1 cm at the widest, 0.9 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 30 %).

  1. Size before assembly: about 1 cm at the widest, 2.7 cm long; 8 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 80 % -->

  1. Size before assembly: about 1.4 cm at the widest, 0.9 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.<!-- flattened 60 % -->

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.3 cm at the widest, 3.5 cm long; 10 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.3 cm at the widest, 0.8 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 90 % -->

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the penguin): in round 18, 6 st apart (count along round 18: about 3.1 st each side of the centre front line).
  • Embroidery in black thread (on the penguin) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 16 and 17, 6.5 st from the centre front line, toward the toy's left ) → (between rounds 15 and 16, 5 st from the centre front line, toward the toy's left ) → (in round 14, 3 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the fish) (2, symmetric: the toy's left side is described, the right is its mirror image): in black thread, a oval about 3 mm wide and 3 mm tall, horizontal stitches; centred in round 4, 1.5 st from the centre front line, toward the toy's left .
  • Embroidery in black thread (on the penguin), straight stitches through: (in round 20, 1 st from the centre front line, toward the toy's right ) → (between rounds 19 and 20, 0.5 st from the centre front line, toward the toy's right ) → (in round 20, on the centre front line ) → (between rounds 19 and 20, 0.5 st from the centre front line, toward the toy's left ) → (in round 20, 1 st from the centre front line, toward the toy's left ).

Abréviations

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet