amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Plantes

Smiling Pinecone Ornament modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 31 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesPlantes

Difficulté
3/3
Temps
~4 h
Taille
9.1 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet pinecone pattern: a Smiling Pinecone Ornament amigurumi, about 9 cm tall in DK yarn with a 2.5 mm hook. A tapered cone, wide at the top and pointed at the bottom, is covered in rows of pointed overlapping scales in two shades of brown, with a small face of black embroidered eyes and smile on the scales and a red ribbon loop on top. You need about 120 m of yarn: 50 m brown, 50 m light brown, 15 m dark brown and 5 m red. Plan on roughly 4 hours. Hang it on the tree or tuck it into a winter wreath or a woodland-themed gift. Spin the 3D model and follow the round-by-round pattern; the scales are small cones sewn on in rows.

Comment crocheter Smiling Pinecone Ornament

Avancé · 9 cm de haut · environ 4 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 69 pièces en rangs : Cone body, Light scale ×33, Scale ×34, Red ribbon loop (31 rangs au total).
  2. Rembourrez et assemblez en 11 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 9 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 25

  1. Size before assembly: about 4.5 cm at the widest, 6.7 cm long; 20 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 12 stitches of the last round, pull tight and hide the end inside.

  1. Of these: on the cone body — 33 (16 pairs, left and right, and 1 single). Size before assembly: about 1.6 cm at the widest, 1.1 cm long; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Of these: on the cone body — 34 (14 pairs, left and right, and 6 single). Size before assembly: about 1.6 cm at the widest, 1.1 cm long; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2.3 cm at the widest, 1.1 cm long; 3 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in red (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 18 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Satin stitch (on the cone body) (2, symmetric: the toy's left side is described, the right is its mirror image): in black thread in several layers so it stands out, a oval about 4 mm wide and 5 mm tall, horizontal stitches; centred between rounds 13 and 14, 1 st from the centre front line, toward the toy's left .
  • Satin stitch (on the cone body): in black thread in several layers so it stands out, a oval about 2 mm wide and 2 mm tall, horizontal stitches; centred in round 11, on the centre front line .
  • Satin stitch (on the cone body) (2, symmetric: the toy's left side is described, the right is its mirror image): in black thread in several layers so it stands out, a oval about 2 mm wide and 2 mm tall, horizontal stitches; centred in round 12, 1 st from the centre front line, toward the toy's left .
  • Satin stitch (on the cone body) (2, symmetric: the toy's left side is described, the right is its mirror image): in black thread in several layers so it stands out, a oval about 2 mm wide and 2 mm tall, horizontal stitches; centred between rounds 12 and 13, 1.5 st from the centre front line, toward the toy's left .

Cone body · R1–R6–7

MR××××××VVVVVV××××××

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    ×××××××V×V×V×V×V×V××××××××××××××××××
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done