amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Plantes

Poinsettia in a Pot modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 73 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesPlantes

Difficulté
3/3
Temps
~4 h
Taille
10.5 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A free crochet poinsettia pattern: a red amigurumi flower with yellow centre beads in a smiling gold pot. Eight big red bracts and six darker ones form the star, green leaves peek out below, and the pot has embroidered happy eyes, so this poinsettia plushie never needs watering. It stands about 10.5 cm (4.1 in) tall and is worked in the round in single crochet with DK yarn and a 2.5 mm hook; the bracts, leaves and beads are small stuffed pieces sewn on a short stalk and the pot. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to see how the flower is built, a sweet Christmas table decoration.

Comment crocheter Poinsettia in a Pot

Avancé · 11 cm de haut · environ 4 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 28 pièces en rangs : Pot, Stalk, Bract ×8, Upper bract ×6, Green leaf ×4, Yellow bead ×6, Cheek ×2 (73 rangs au total).
  2. Rembourrez et assemblez en 10 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 14 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 58

  1. Size before assembly: about 6.6 cm at the widest, 7.2 cm long; 26 rounds.
  2. Change to rim gold (pull it through on the last yarn-over of R15).
  3. Change to soil brown (pull it through on the last yarn-over of R20).
  4. → Start stuffing (firmly) and keep adding as you decrease.
  5. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 0.8 cm at the widest, 2.1 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 2.4 cm at the widest, 5.1 cm long; 15 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Press the piece flat to about 1.2 cm thick (oval cross-section).<!-- press the piece flat by 50 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2 cm at the widest, 3.3 cm long; 10 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Press the piece flat to about 1 cm thick (oval cross-section).<!-- press the piece flat by 50 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.6 cm at the widest, 3.4 cm long; 10 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Press the piece flat to about 8 mm thick (oval cross-section).<!-- press the piece flat by 50 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 4 stitches of the last round, pull tight and hide the end inside.

  1. Of these: mid — 1; no. 1 — 1; no. 2 — 1; no. 3 — 1; no. 4 — 1; no. 5 — 1. Size before assembly: about 1.2 cm at the widest, 1.4 cm long; 4 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Embroidery in dark thread (on the pot) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 12, 2.5 st from the centre front line, toward the toy's left ) → (between rounds 12 and 13, 3 st from the centre front line, toward the toy's left ) → (in round 13, 3.5 st from the centre front line, toward the toy's left ) → (between rounds 12 and 13, 4 st from the centre front line, toward the toy's left ) → (in round 12, 4.5 st from the centre front line, toward the toy's left ).
  • Embroidery in dark thread (on the pot), straight stitches through: (in round 11, 1 st from the centre front line, toward the toy's right ) → (in round 10, on the centre front line ) → (in round 11, 1 st from the centre front line, toward the toy's left ).

Pot · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done