amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux marins

Pufferfish modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 55 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux marins

Difficulté
3/3
Temps
~3 h
Taille
9.4 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A free crochet pufferfish pattern for a round, spiky amigurumi ball fish with big shiny eyes and puckered coral lips. This pufferfish plushie is sunny yellow with a cream belly, little cream spikes all over, caramel spots on its back and orange fins at the sides. The body is one ball worked in the round in single crochet with DK yarn and a 2.5 mm hook, with 14 mm safety eyes; the spikes, spots, fins and lips are sewn on, and it ends up about 9.5 cm (3.7 in) tall. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to see where every spike goes.

Comment crocheter Pufferfish

Avancé · 9 cm de haut · environ 3 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 33 pièces en rangs : Ball body, Lips, Tail fin, Side fin ×2, Spike ×19, Spot ×7, Cheek ×2 (55 rangs au total).
  2. Rembourrez et assemblez en 7 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 11 prêts

Dans le même genre

Tout dans animaux marins →
  • Aperçu de Tiny Blue Turtle
    Générateur
    CrocheterRemix

    Tiny Blue Turtle

    par le générateur de modèles

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 50

  1. Size before assembly: about 8.5 cm at the widest, 7.3 cm long; 29 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.3 cm at the widest, 1.2 cm long; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a dish: rounds 1–2 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 2.7 mm at the centre) and turn rounds 3–4 to the back: they make a thick rounded rim (about 8 mm thick) and lie behind as a second layer; the piece is about 23 mm across.<!-- (dish 70 %) -->

  1. Size before assembly: about 3.6 cm at the widest, 2.8 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 1.4 cm thick.<!-- flattened 60 % -->

  1. Size before assembly: about 3 cm at the widest, 1.7 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 2.2 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 30 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 35 %) -->

  1. Size before assembly: about 1 cm at the widest, 0.8 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 14 mm (on the ball body): between rounds 25 and 26, 9 st apart (count along round 25: about 4.5 st each side of the centre top line).
  • Satin stitch (on the lips): in maroon thread, a oval about 4 mm wide and 3 mm tall, horizontal stitches; centred in round 1, on the centre top line.

Ball body · R1–R3

MR××××××VVVVVV×V×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Pink Starfish in Green Shorts
    Générateur
    CrocheterRemix

    Pink Starfish in Green Shorts

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de No-Sew Mini Whale
    Générateur
    CrocheterRemix

    No-Sew Mini Whale

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de No-Sew Narwhal
    Générateur
    CrocheterRemix

    No-Sew Narwhal

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Squid Keychain
    Générateur
    CrocheterRemix

    Squid Keychain

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Worry Octopus
    Générateur
    CrocheterRemix

    Worry Octopus

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Seal Doing a Belly Flop
    Générateur
    CrocheterRemix

    Seal Doing a Belly Flop

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Kraken in a Teacup
    Générateur
    CrocheterRemix

    Kraken in a Teacup

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Axolotl Leaning on a Heart
    Générateur
    CrocheterRemix

    Axolotl Leaning on a Heart

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Gamer Axolotl with Headphones
    Générateur
    CrocheterRemix

    Gamer Axolotl with Headphones

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Seahorse Holding a Pearl
    Générateur
    CrocheterRemix

    Seahorse Holding a Pearl

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Offended Puffed-Up Pufferfish
    Générateur
    CrocheterRemix

    Offended Puffed-Up Pufferfish

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • V×V×V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done