amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Rat Chef modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 141 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
3/3
Temps
~5 h
Taille
17.8 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet rat pattern: a Rat Chef amigurumi, about 18 cm tall in DK yarn with a 2.5 mm hook. It is a smiling grey rat with big pink ears and a long pink tail, a tall white chef hat, a white apron and a little wooden spoon raised in one paw. You need about 145 m of yarn: 85 m grey, 35 m white, 10 m pink, 5 m light brown, 5 m light grey and 5 m cream. Plan on roughly 5 hours. A fun present for a cook or anyone who loves a kitchen mascot; turn the 3D model around and follow the round-by-round pattern.

Comment crocheter Rat Chef

Avancé · 18 cm de haut · environ 5 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 14 pièces en rangs : Body, Head, Muzzle, Ear ×2, Leg ×2, Foot pad ×2, Arm, Raised arm, Spoon handle, Spoon bowl, Chef hat (141 rangs au total).
  2. Rembourrez et assemblez en 13 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 11 prêts

Dans le même genre

Tout dans animaux →
  • Aperçu de Winnie-the-Pooh with a Honey Pot
    Générateur
    CrocheterRemix

    Winnie-the-Pooh with a Honey Pot

    par le générateur de modèles

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 102

  1. Size before assembly: about 7.4 cm at the widest, 5.5 cm long; 19 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 8.4 cm at the widest, 6.9 cm long; 28 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 2.1 × 1.7 cm at the widest, 2.7 cm long; 8 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With light grey: ch 3.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 4.8 cm at the widest, 2.1 cm long; 11 rounds.
  2. Change to grey (pull it through on the last yarn-over of R4).
  3. → This piece is not stuffed.
  4. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside. Do not stuff. Shape it into a dish: rounds 1–5 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 5 mm at the centre) and turn rounds 6–11 to the back: they make a thick rounded rim (about 8 mm thick) and lie behind as a second layer; the piece is about 48 mm across.<!-- (dish 50 %) -->

  1. Size before assembly: about 3.3 cm at the widest, 3.4 cm long; 11 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 2.3 cm across; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.6 cm at the widest, 4.1 cm long; 11 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.6 cm at the widest, 4.1 cm long; 11 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 0.7 cm at the widest, 3.5 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 2 cm at the widest, 1.8 cm long; 6 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Press the piece flat to about 1 cm thick (oval cross-section).<!-- press the piece flat by 50 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 7.6 cm at the widest, 6.6 cm long; 23 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the head): in round 14, 9 st apart (count along round 14: about 4.7 st each side of the centre front line).
  • Satin stitch (on the muzzle): in rose thread, a oval about 8 mm wide and 6 mm tall, horizontal stitches; centred in round 1, on the centre top line.
  • Embroidery in dark thread (on the muzzle), straight stitches through: (in round 1, on the centre bottom line) → (in round 2, on the centre bottom line).
  • Blush about 11 mm, dry pastel or blush (on the head, both sides): between rounds 15 and 16, 7 st from the centre front line, toward the toy's left. Colour blush.
  • Embroidery in dark thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 3, 2.5 st from the centre top line, toward the toy's left ) → (between rounds 3 and 4, 2 st from the centre top line, toward the toy's left ) → (in round 4, 1.5 st from the centre top line, toward the toy's left ).
  • Embroidery in dark thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 4, 3 st from the centre top line, toward the toy's left ) → (between rounds 4 and 5, 2.5 st from the centre top line, toward the toy's left ) → (in round 5, 2.5 st from the centre top line, toward the toy's left ).
  • Embroidery in dark thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 2, on the centre bottom line) → (in round 3, 0.5 st from the centre bottom line, toward the toy's left ) → (in round 3, 1.5 st from the centre bottom line, toward the toy's left ) → (in round 3, 4 st from the centre top line, toward the toy's left ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Tigger the Bouncy Tiger
    Générateur
    CrocheterRemix

    Tigger the Bouncy Tiger

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Speedy Blue Hedgehog
    Générateur
    CrocheterRemix

    Speedy Blue Hedgehog

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de White Beagle with Black Ears
    Générateur
    CrocheterRemix

    White Beagle with Black Ears

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Grey Tabby Loaf Cat
    Générateur
    CrocheterRemix

    Grey Tabby Loaf Cat

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Confused Yellow Duck
    Générateur
    CrocheterRemix

    Confused Yellow Duck

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Pudding Puppy in a Beret
    Générateur
    CrocheterRemix

    Pudding Puppy in a Beret

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Electric Yellow Mouse
    Générateur
    CrocheterRemix

    Electric Yellow Mouse

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Piglet in a Green Jumper
    Générateur
    CrocheterRemix

    Piglet in a Green Jumper

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Peter Rabbit in a Blue Jacket
    Générateur
    CrocheterRemix

    Peter Rabbit in a Blue Jacket

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Bunny in a Pink Hood
    Générateur
    CrocheterRemix

    Bunny in a Pink Hood

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Simple White Bunny in a Dress
    Générateur
    CrocheterRemix

    Simple White Bunny in a Dress

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done