amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux marins

Shark Cat modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 97 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux marins

Difficulté
3/3
Temps
~3 h
Taille
11.1 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet shark pattern: a Shark Cat amigurumi, about 11 cm tall in DK yarn with a 2.5 mm hook. An orange cat face peeks out of a grey shark costume with a red mouth lined with white teeth, cat ears and a shark fin on top and a white belly. You need about 100 m of yarn: 55 m grey, 15 m red, 15 m orange, 5 m white, 5 m cream and 5 m pink. Plan on roughly 3 hours. A fun gift for cat lovers who also like sharks, or a quirky shelf friend. You can spin the 3D model and work through the round-by-round pattern.

Comment crocheter Shark Cat

Avancé · 11 cm de haut · environ 3 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 14 pièces en rangs : Costume body, Head (shark hood), Shark mouth, Cat face, Dorsal fin, Sleeve ×2, Paw, Tail fin, Ear ×2, Muzzle, Cheek ×2 (97 rangs au total).
  2. Rembourrez et assemblez en 11 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 11 prêts

Dans le même genre

Tous les modèles d’amigurumi chat →Tous les modèles d’amigurumi requin →Tout dans animaux marins →
  • Aperçu de Tiny Blue Turtle
    Générateur
    CrocheterRemix

    Tiny Blue Turtle

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 82

  1. Size before assembly: about 6.6 cm at the widest, 4.1 cm long; 15 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Change to grey (pull it through on the last yarn-over of R14).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 8.2 cm at the widest, 6.1 cm long; 26 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat oval about 10.2 × 7.4 cm; 10 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With red: ch 9.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat oval about 8.7 × 5.9 cm; 8 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With orange: ch 9.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Do not stuff.

  1. Size before assembly: about 2.1 cm at the widest, 3 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.<!-- flattened 70 % -->

  1. Size before assembly: about 1.6 cm at the widest, 3.4 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 3 mm thick.<!-- flattened 70 % -->

  1. Size before assembly: about 1.3 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 4 mm thick.<!-- flattened 70 % -->

  1. Size before assembly: about 1.3 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 1 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 13 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 35 %) -->

  1. A flat oval about 2.6 × 2.2 cm; 3 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With cream: ch 3.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 0.6 cm across; 1 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the cat face): in round 3, 15 st apart (count along round 3: about 7.6 st each side of the centre top line).
  • Satin stitch (on the muzzle): in pink thread, a triangle about 6 mm wide and 4.5 mm tall, horizontal stitches, turned 180° clockwise (looking at that surface); centred in round 1, on the centre top line .
  • Embroidery in dark brown thread (on the muzzle), straight stitches through: (in round 2, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 0.5 st from the centre bottom line, toward the toy's left ) → (in round 2, on the centre bottom line) → (between rounds 2 and 3, 0.5 st from the centre bottom line, toward the toy's right ) → (in round 2, 1 st from the centre bottom line, toward the toy's right ).
  • Satin stitch (on the shark mouth): in white thread in several layers so it stands out, a triangle about 6 mm wide and 6.5 mm tall, horizontal stitches; centred in round 8, 11.5 st from the centre top line, toward the toy's right .
  • Satin stitch (on the shark mouth): in white thread in several layers so it stands out, a triangle about 6 mm wide and 6.5 mm tall, horizontal stitches; centred in round 8, 9 st from the centre top line, toward the toy's right .
  • Satin stitch (on the shark mouth): in white thread in several layers so it stands out, a triangle about 6 mm wide and 6.5 mm tall, horizontal stitches; centred in round 8, 6 st from the centre top line, toward the toy's right .
  • Satin stitch (on the shark mouth): in white thread in several layers so it stands out, a triangle about 6 mm wide and 6.5 mm tall, horizontal stitches; centred in round 8, 3 st from the centre top line, toward the toy's right .
  • Satin stitch (on the shark mouth): in white thread in several layers so it stands out, a triangle about 6 mm wide and 6.5 mm tall, horizontal stitches; centred in round 8, on the centre top line.
  • Satin stitch (on the shark mouth): in white thread in several layers so it stands out, a triangle about 6 mm wide and 6.5 mm tall, horizontal stitches; centred in round 8, 3 st from the centre top line, toward the toy's left .
  • Satin stitch (on the shark mouth): in white thread in several layers so it stands out, a triangle about 6 mm wide and 6.5 mm tall, horizontal stitches; centred in round 8, 6 st from the centre top line, toward the toy's left .
  • Satin stitch (on the shark mouth): in white thread in several layers so it stands out, a triangle about 6 mm wide and 6.5 mm tall, horizontal stitches; centred in round 8, 9 st from the centre top line, toward the toy's left .

Abréviations

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    par le générateur de modèles
    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Pink Starfish in Green Shorts
    Générateur
    CrocheterRemix

    Pink Starfish in Green Shorts

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de No-Sew Mini Whale
    Générateur
    CrocheterRemix

    No-Sew Mini Whale

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de No-Sew Narwhal
    Générateur
    CrocheterRemix

    No-Sew Narwhal

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Squid Keychain
    Générateur
    CrocheterRemix

    Squid Keychain

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Worry Octopus
    Générateur
    CrocheterRemix

    Worry Octopus

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Seal Doing a Belly Flop
    Générateur
    CrocheterRemix

    Seal Doing a Belly Flop

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Kraken in a Teacup
    Générateur
    CrocheterRemix

    Kraken in a Teacup

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Axolotl Leaning on a Heart
    Générateur
    CrocheterRemix

    Axolotl Leaning on a Heart

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Gamer Axolotl with Headphones
    Générateur
    CrocheterRemix

    Gamer Axolotl with Headphones

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Seahorse Holding a Pearl
    Générateur
    CrocheterRemix

    Seahorse Holding a Pearl

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Offended Puffed-Up Pufferfish
    Générateur
    CrocheterRemix

    Offended Puffed-Up Pufferfish

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Satin stitch (on the shark mouth): in white thread in several layers so it stands out, a triangle about 6 mm wide and 6.5 mm tall, horizontal stitches; centred in round 8, 11.5 st from the centre top line, toward the toy's left .