amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Racing Snail in a Helmet modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 89 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
2/3
Temps
~3 h
Taille
8 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet snail pattern: a Racing Snail in a Helmet amigurumi, about 8 cm tall in DK yarn with a 2.5 mm hook. A green snail wears a white helmet with a red stripe, its eye stalks poking out, and carries a red shell with a white circle and a big number 1. You need about 90 m of yarn: 45 m green, 20 m white, 15 m red, 5 m black and 5 m pink. Plan on roughly 3 hours. A funny little gift for a racing fan, or a slow-and-steady mascot for your shelf. You can spin the 3D model and work through the pattern round by round.

Comment crocheter Racing Snail in a Helmet

Intermédiaire · 8 cm de haut · environ 3 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 8 pièces en rangs : Snail body, Head, Shell, Cheek ×2, Racing helmet, Eye stalk ×2 (89 rangs au total).
  2. Rembourrez et assemblez en 6 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 10 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 62

  1. Size before assembly: about 5.8 cm at the widest, 9.8 cm long; 31 rounds.
  2. → Start stuffing (moderately) and keep adding as you decrease.
  3. Press the piece flat to about 3.5 cm thick (oval cross-section).<!-- press the piece flat by 40 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 4.8 cm at the widest, 3.5 cm long; 15 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 6.4 cm at the widest, 4.9 cm long; 21 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's line on the toy's left side (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. → Start stuffing (moderately) and keep adding as you decrease.
  3. Press the piece flat to about 3.2 cm thick (oval cross-section).<!-- press the piece flat by 50 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 5.6 cm at the widest, 1.9 cm long; 10 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.1 cm at the widest, 3.4 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eye with a printed glint 10 mm (on the eye stalk) (2: one on each eye stalk; the left one is described, the right is its mirror): between rounds 5 and 6, on the centre front line.
  • Embroidery in black thread (on the head), straight stitches through: (between rounds 9 and 10, 1.5 st from the centre front line, toward the toy's right ) → (in round 10, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 10 and 11, on the centre front line ) → (in round 10, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 9 and 10, 1.5 st from the centre front line, toward the toy's left ).
  • Strap (on the shell): with black, ch 9 (≈ 2.5 cm); for a firmer strap sl st back along it. Sew it along (in round 8, 1 st from the line on the toy's left side, toward the back ) → (in round 11, 1 st from the line on the toy's left side, toward the back ) → (between rounds 14 and 15, 1 st from the line on the toy's left side, toward the back ), catching it every 2–3 ch.
  • Strap (on the shell): with black, ch 5 (≈ 1.3 cm); for a firmer strap sl st back along it. Sew it along (in round 8, 1 st from the line on the toy's left side, toward the back ) → (in round 9, on the line on the toy's left side) → (between rounds 10 and 11, 1 st from the line on the toy's left side, toward the front ), catching it every 2–3 ch.
  • Strap (on the shell): with black, ch 9 (≈ 2.5 cm); for a firmer strap sl st back along it. Sew it along (in round 8, 1 st from the line on the toy's right side, toward the back ) → (in round 11, 1 st from the line on the toy's right side, toward the back ) → (between rounds 14 and 15, 1 st from the line on the toy's right side, toward the back ), catching it every 2–3 ch.
  • Strap (on the shell): with black, ch 5 (≈ 1.3 cm); for a firmer strap sl st back along it. Sew it along (in round 8, 1 st from the line on the toy's right side, toward the back ) → (in round 9, on the line on the toy's right side) → (between rounds 10 and 11, 1 st from the line on the toy's right side, toward the front ), catching it every 2–3 ch.

Snail body · R1–R5–6

MR××××××VVVVVV×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    V×V×V×V×V××V××V××V××V××V×××××××××××××××××××××××××
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done