amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Fantastique

Sleepy Big Belly Bear modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 68 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesFantastique

Difficulté
1/3
Temps
~3 h
Taille
13.4 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A crochet amigurumi inspired by Snorlax from Pokémon: a big sleepy teal giant with a cream belly and padded feet. About 13 cm tall in DK yarn with a 2.5 mm hook. A free pattern with every round counted, a 3D model to turn around and a printable PDF. Unofficial fan-made design, not affiliated with or endorsed by Pokémon.

Comment crocheter Sleepy Big Belly Bear

Pour débutants · 13 cm de haut · environ 3 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 8 pièces en rangs : Body, Belly patch, Ear ×2, Arm ×2, Foot ×2 (68 rangs au total).
  2. Rembourrez et assemblez en 5 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 8 prêts

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

RemixCrocheter

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 54

  1. Size before assembly: about 10.2 cm at the widest, 12 cm long; 41 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat oval about 7.9 × 5.1 cm; 7 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With bellycream: ch 9.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2.4 cm at the widest, 1.4 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 1.7 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 24 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 35 %) -->

  1. Size before assembly: about 1.6 cm at the widest, 1.9 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 3.1 cm at the widest, 2.3 cm long; 9 rounds.
  2. Change to bellycream (pull it through on the last yarn-over of R2).
  3. Change to snorteal (pull it through on the last yarn-over of R4).
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Embroidery in lineblack thread (on the body) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 32 and 33, 1 st from the centre front line, toward the toy's left ) → (between rounds 32 and 33, 2 st from the centre front line, toward the toy's left ) → (between rounds 32 and 33, 2.5 st from the centre front line, toward the toy's left ).
  • Embroidery in lineblack thread (on the body), straight stitches through: (between rounds 29 and 30, 1.5 st from the centre front line, toward the toy's right ) → (in round 29, 1 st from the centre front line, toward the toy's right ) → (in round 29, on the centre front line ) → (in round 29, 1 st from the centre front line, toward the toy's left ) → (between rounds 29 and 30, 1.5 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the body) (2, symmetric: the toy's left side is described, the right is its mirror image): in fangwhite thread, a triangle about 3 mm wide and 3.5 mm tall, horizontal stitches, turned 180° clockwise (looking at that surface); centred in round 30, 1 st from the centre front line, toward the toy's left .

Body · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done