amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Plantes

Leggy Snowman modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 120 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesPlantes

Difficulté
3/3
Temps
~4 h
Taille
17.1 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet snowman pattern: a Leggy Snowman amigurumi, about 17 cm tall in DK yarn with a 2.5 mm hook. A white two-ball snowman with a carrot nose, black top hat, red scarf and very long legs in red and white striped socks. You need about 120 m of yarn: 65 m snow, 25 m ebony, 20 m red, 5 m orange and 5 m pink. Plan on roughly 4 hours. Sit it on a shelf with its legs dangling forward or give it as a funny winter gift. Spin the 3D model and follow the round-by-round pattern.

Comment crocheter Leggy Snowman

Avancé · 17 cm de haut · environ 4 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 14 pièces en rangs : Lower snowball, Head (upper snowball), Carrot nose, Top hat, Scarf, Coal button ×3, Cheek ×2, Leg ×2, Twig arm ×2 (120 rangs au total).
  2. Rembourrez et assemblez en 12 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 10 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 84

  1. Size before assembly: about 8.3 cm at the widest, 6.4 cm long; 22 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 7.4 cm at the widest, 5.8 cm long; 24 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.3 cm at the widest, 2.3 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 6 cm at the widest, 3.6 cm long; 16 rounds.
  2. Change to red (pull it through on the last yarn-over of R11).
  3. Change to ebony (pull it through on the last yarn-over of R13).
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 4.9 cm at the widest, 1.8 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 0.8 cm across; 1 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: an oval about 3.2 × 2 cm at the widest, 11.9 cm long; 34 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs vertically, top to bottom; the starting chain is at the front of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns.
  2. With ebony: ch 5.
  3. Change to snow (pull it through on the last yarn-over of R5).
  4. Change to red (pull it through on the last yarn-over of R7).
  5. Change to snow (pull it through on the last yarn-over of R9).
  6. Change to red (pull it through on the last yarn-over of R11).
  7. Change to snow (pull it through on the last yarn-over of R13).
  8. Change to red (pull it through on the last yarn-over of R15).
  9. Change to snow (pull it through on the last yarn-over of R17).
  10. Change to red (pull it through on the last yarn-over of R19).
  11. Change to snow (pull it through on the last yarn-over of R21).
  12. Change to red (pull it through on the last yarn-over of R23).
  13. Change to snow (pull it through on the last yarn-over of R25).
  14. Change to red (pull it through on the last yarn-over of R27).
  15. Change to snow (pull it through on the last yarn-over of R29).
  16. Change to red (pull it through on the last yarn-over of R31).
  17. Change to snow (pull it through on the last yarn-over of R33).
  18. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 0.7 cm at the widest, 3.8 cm long; 11 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the head (upper snowball)): between rounds 11 and 12, 8 st apart (count along round 11: about 3.8 st each side of the centre front line).
  • Satin stitch (on the head (upper snowball)): in ebony thread, a oval about 2.6 mm wide and 2.6 mm tall, horizontal stitches; centred between rounds 15 and 16, 1.5 st from the centre front line, toward the toy's right .
  • Satin stitch (on the head (upper snowball)): in ebony thread, a oval about 2.6 mm wide and 2.6 mm tall, horizontal stitches; centred in round 16, 0.5 st from the centre front line, toward the toy's right .
  • Satin stitch (on the head (upper snowball)): in ebony thread, a oval about 2.6 mm wide and 2.6 mm tall, horizontal stitches; centred in round 16, on the centre front line .
  • Satin stitch (on the head (upper snowball)): in ebony thread, a oval about 2.6 mm wide and 2.6 mm tall, horizontal stitches; centred in round 16, 0.5 st from the centre front line, toward the toy's left .
  • Satin stitch (on the head (upper snowball)): in ebony thread, a oval about 2.6 mm wide and 2.6 mm tall, horizontal stitches; centred between rounds 15 and 16, 1.5 st from the centre front line, toward the toy's left .

Lower snowball · R1–R5

MR××××××VVVVVV×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done