amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Cheering Bear with a Blue Star modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 101 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
3/3
Temps
~4 h
Taille
18.5 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet bear pattern: a Cheering Bear with a Blue Star amigurumi, about 19 cm tall in DK yarn with a 2.5 mm hook. A white teddy-style bear in a blue and white striped scarf throws both arms up with an open happy mouth, balancing a big two-tone blue six-pointed star on its head. You need about 110 m of yarn: 90 m cream, 10 m blue, 5 m light blue and 5 m beige. Plan on roughly 4 hours. A cheerful Hanukkah gift or a winter shelf friend that is easy to spot from across the room. Spin the 3D model and follow the round-by-round pattern, including the star made of two small flat triangles.

Comment crocheter Cheering Bear with a Blue Star

Avancé · 19 cm de haut · environ 4 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 14 pièces en rangs : Body, Head, Muzzle, Ear ×2, Scarf, Scarf end, Arm ×2, Leg ×2, Tail, Star triangle (point up), Star triangle (point down) (129 rangs au total).
  2. Rembourrez et assemblez en 11 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 9 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 97

  1. Size before assembly: about 7.5 cm at the widest, 6.3 cm long; 21 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 7.6 cm at the widest, 6.6 cm long; 26 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 3.4 × 2.2 cm at the widest, 1.8 cm long; 6 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With cream: ch 5.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 2.5 cm at the widest, 1.2 cm long; 4 rounds.
  2. Change to cream (pull it through on the last yarn-over of R1).
  3. → This piece is not stuffed.
  4. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside. Do not stuff. Shape it into a dish: rounds 1–2 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 2.1 mm at the centre) and turn rounds 3–4 to the back: they make a thick rounded rim (about 8 mm thick) and lie behind as a second layer; the piece is about 25 mm across.<!-- (dish 50 %) -->

  1. Size before assembly: about 6.2 cm at the widest, 1.8 cm long; 3 rounds.
  2. Change to cream (pull it through on the last yarn-over of R1).
  3. Change to blue (pull it through on the last yarn-over of R2).
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: an oval about 1.7 × 0.5 cm at the widest, 3.2 cm long; 9 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With cream: ch 5.
  3. Change to blue (pull it through on the last yarn-over of R2).
  4. Change to cream (pull it through on the last yarn-over of R4).
  5. Change to blue (pull it through on the last yarn-over of R6).
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 90 % --> Bend ≈ 75° around round 6<!-- the bend spreads over 3 rounds -->. Bend the piece so the inner side of the bend faces down on the finished toy (on the piece: in round 6, on the centre bottom line). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 6 and 7 together.

  1. Size before assembly: about 2 cm at the widest, 5.8 cm long; 17 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 3.3 cm at the widest, 3.4 cm long; 11 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.5 cm at the widest, 1.2 cm long; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Flat motif — triangle (worked in turned rows, one layer of fabric), about 5 × 5.6 cm; 14 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. Flat motif — triangle (worked in turned rows, one layer of fabric), about 5 × 5.6 cm; 14 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10 mm (on the head): in round 14, 8 st apart (count along round 14: about 3.8 st each side of the centre front line).
  • Safety nose, triangle, 11×8 mm (on the muzzle): between rounds 1 and 2, on the centre top line . Colour nose #1f1c1c.
  • Blush about 10 mm, dry pastel or blush (on the head, both sides): in round 17, 6.5 st from the centre front line, toward the toy's left . Colour blush.
  • Satin stitch (on the muzzle): in nose thread, a oval about 9 mm wide and 6 mm tall, horizontal stitches; centred between rounds 2 and 3, on the centre bottom line.
  • Satin stitch (on the muzzle): in tongue thread, a oval about 5 mm wide and 3 mm tall, horizontal stitches; centred in round 3, on the centre bottom line .

Body · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done