amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Fantastique

Mini Stocking Ornament modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 53 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesFantastique

Difficulté
1/3
Temps
~2 h
Taille
14.6 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet christmas stocking pattern: a Mini Stocking Ornament amigurumi, about 15 cm tall in DK yarn with a 2.5 mm hook. A plump red stocking with a white cuff and a green stripe has a smiling face, rosy cheeks and a striped candy cane sticking out of the top. You need about 55 m of yarn: 30 m red, 15 m white, 5 m green and 5 m pink. Plan on roughly 2 hours. It hangs on the tree by its green loop, and it also works as a tiny gift topper or a stocking-stuffer for anyone who loves Christmas. You can spin the 3D model and follow the round-by-round pattern.

Comment crocheter Mini Stocking Ornament

Pour débutants · 15 cm de haut · environ 2 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 5 pièces en rangs : Stocking, Candy cane, Cheek ×2, Hanging loop (53 rangs au total).
  2. Rembourrez et assemblez en 5 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 9 prêts

Dans le même genre

Tout dans fantastique →
  • Aperçu de Green Dino with a Red Saddle
    Générateur
    CrocheterRemix

    Green Dino with a Red Saddle

    par le générateur de modèles

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 34

  1. Size before assembly: about 5.9 cm at the widest, 11 cm long; 35 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Change to red (pull it through on the last yarn-over of R2).
  3. Change to green (pull it through on the last yarn-over of R26).
  4. Change to white (pull it through on the last yarn-over of R27).
  5. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  6. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside. Bend ≈ 90° around round 14<!-- the bend spreads over 5 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 14, on the centre top line). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 8 to round 21, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 13 rounds) and fasten off inside.

  1. Size before assembly: about 1.3 cm at the widest, 4.9 cm long; 14 rounds.
  2. Change to white (pull it through on the last yarn-over of R2).
  3. Change to red (pull it through on the last yarn-over of R4).
  4. Change to white (pull it through on the last yarn-over of R6).
  5. Change to red (pull it through on the last yarn-over of R8).
  6. Change to white (pull it through on the last yarn-over of R10).
  7. Change to red (pull it through on the last yarn-over of R12).
  8. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 160° around round 5<!-- the bend spreads over 5 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's left on the finished toy (on the piece: in round 5, 2.5 st from the centre front line, toward the toy's left). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 2 to round 7, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 5 rounds) and fasten off inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2 cm at the widest, 0.7 cm long; 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in green (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eye with a printed glint 9 mm (on the stocking): between rounds 23 and 24, 7.5 st from the centre top line, toward the front .
  • Safety eye with a printed glint 9 mm (on the stocking): between rounds 23 and 24, 13.5 st from the centre top line, toward the front .
  • Embroidery in brown thread (on the stocking), straight stitches through: (between rounds 22 and 23, 12 st from the centre top line, toward the front ) → (between rounds 21 and 22, 11 st from the centre top line, toward the front ) → (between rounds 21 and 22, 10 st from the centre top line, toward the front ) → (between rounds 22 and 23, 9 st from the centre top line, toward the front ).

Stocking · R1–R5

MR××××××VVVVVV×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Big Grey Forest Spirit
    Générateur
    CrocheterRemix

    Big Grey Forest Spirit

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Black Baby Dragon
    Générateur
    CrocheterRemix

    Black Baby Dragon

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Blue Alien with Big Ears
    Générateur
    CrocheterRemix

    Blue Alien with Big Ears

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Little Spider Hero
    Générateur
    CrocheterRemix

    Little Spider Hero

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Sleepy Big Belly Bear
    Générateur
    CrocheterRemix

    Sleepy Big Belly Bear

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Little Green Ogre
    Générateur
    CrocheterRemix

    Little Green Ogre

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Burlap Sack Doll
    Générateur
    CrocheterRemix

    Burlap Sack Doll

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Happy Snowman with Twig Arms
    Générateur
    CrocheterRemix

    Happy Snowman with Twig Arms

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Yellow Capsule Helper
    Générateur
    CrocheterRemix

    Yellow Capsule Helper

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Ghost in a Mouse Costume
    Générateur
    CrocheterRemix

    Ghost in a Mouse Costume

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Pirate Boy in a Straw Hat
    Générateur
    CrocheterRemix

    Pirate Boy in a Straw Hat

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done