amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Grey Tabby Cat modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 103 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
3/3
Temps
~3 h
Taille
11.4 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A free tabby cat crochet pattern for a classic grey kitten sitting with its long striped tail wrapped around its feet. This amigurumi kitten has darker grey stripes worked as color rows on the head, body, legs and tail, a white muzzle and chest, pink-lined ears and big green eyes with a glint. It is made in the round in single crochet with DK yarn and a 2.5 mm hook, with a separate head and body, sewn-on legs, muzzle and ears and 14 mm safety eyes, and it stands about 11 cm (4.5 in) tall. Each round is written out with stitch counts and color changes, and the interactive 3D model lets you check where every piece goes.

Comment crocheter Grey Tabby Cat

Avancé · 11 cm de haut · environ 3 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 14 pièces en rangs : Body, Head, Muzzle, Ear ×2, Front leg ×2, Haunch ×2, Back foot ×2, Tail, Cheek ×2 (103 rangs au total).
  2. Rembourrez et assemblez en 9 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 10 prêts

Dans le même genre

Tous les modèles d’amigurumi chat →Tout dans animaux →
  • Aperçu de Winnie-the-Pooh with a Honey Pot
    Générateur
    CrocheterRemix

    Winnie-the-Pooh with a Honey Pot

    par le générateur de modèles

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 84

  1. Size before assembly: an oval about 6.3 × 5.5 cm at the widest, 5.7 cm long; 18 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs front to back; the starting chain is at the bottom of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. With grey: ch 4.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 7.5 cm at the widest, 6.2 cm long; 25 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Change to grey (pull it through on the last yarn-over of R8).
  3. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  4. Change to grey (pull it through on the last yarn-over of R22).
  5. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 2.6 × 2.2 cm at the widest, 1 cm long; 4 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With white: ch 3.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 3.5 cm at the widest, 2.1 cm long; 7 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 4 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 35 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 55 %) -->

  1. Size before assembly: about 2 cm at the widest, 3.8 cm long; 11 rounds.
  2. Change to grey (pull it through on the last yarn-over of R4).
  3. Change to stripe (pull it through on the last yarn-over of R6).
  4. Change to grey (pull it through on the last yarn-over of R7).
  5. Change to stripe (pull it through on the last yarn-over of R9).
  6. Change to grey (pull it through on the last yarn-over of R10).
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 3 cm across; 4 rounds.
  2. Change to stripe (pull it through on the last yarn-over of R2).
  3. Change to grey (pull it through on the last yarn-over of R3).
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2.4 cm at the widest, 1.7 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.5 cm at the widest, 9.3 cm long; 26 rounds.
  2. Change to grey (pull it through on the last yarn-over of R3).
  3. Change to stripe (pull it through on the last yarn-over of R5).
  4. Change to grey (pull it through on the last yarn-over of R7).
  5. Change to stripe (pull it through on the last yarn-over of R9).
  6. Change to grey (pull it through on the last yarn-over of R11).
  7. Change to stripe (pull it through on the last yarn-over of R13).
  8. Change to grey (pull it through on the last yarn-over of R15).
  9. Change to stripe (pull it through on the last yarn-over of R17).
  10. Change to grey (pull it through on the last yarn-over of R19).
  11. Change to stripe (pull it through on the last yarn-over of R21).
  12. Change to grey (pull it through on the last yarn-over of R23).
  13. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 165° around round 16<!-- the bend spreads over 13 rounds -->. After stuffing, bend the piece so the inner side of the bend faces forward on the finished toy (on the piece: in round 16, on the centre front line). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 13 to round 19, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 6 rounds) and fasten off inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 14 mm (on the head): between rounds 13 and 14, 8 st apart (count along round 13: about 3.9 st each side of the centre front line). Iris iris #8fc46a.
  • Satin stitch (on the muzzle): in nose thread, a triangle about 6 mm wide and 4.5 mm tall, horizontal stitches; centred between rounds 1 and 2, on the centre top line .
  • Embroidery in mouth thread (on the muzzle), straight stitches through: (in round 1, on the centre bottom line ) → (in round 2, on the centre bottom line ).
  • Embroidery in mouth thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 2, on the centre bottom line ) → (in round 3, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 1.5 st from the centre bottom line, toward the toy's left ).

Abréviations

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Tigger the Bouncy Tiger
    Générateur
    CrocheterRemix

    Tigger the Bouncy Tiger

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Speedy Blue Hedgehog
    Générateur
    CrocheterRemix

    Speedy Blue Hedgehog

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de White Beagle with Black Ears
    Générateur
    CrocheterRemix

    White Beagle with Black Ears

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Grey Tabby Loaf Cat
    Générateur
    CrocheterRemix

    Grey Tabby Loaf Cat

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Confused Yellow Duck
    Générateur
    CrocheterRemix

    Confused Yellow Duck

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Pudding Puppy in a Beret
    Générateur
    CrocheterRemix

    Pudding Puppy in a Beret

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Electric Yellow Mouse
    Générateur
    CrocheterRemix

    Electric Yellow Mouse

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Piglet in a Green Jumper
    Générateur
    CrocheterRemix

    Piglet in a Green Jumper

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Peter Rabbit in a Blue Jacket
    Générateur
    CrocheterRemix

    Peter Rabbit in a Blue Jacket

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Bunny in a Pink Hood
    Générateur
    CrocheterRemix

    Bunny in a Pink Hood

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Simple White Bunny in a Dress
    Générateur
    CrocheterRemix

    Simple White Bunny in a Dress

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0