amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Plantes

Tulip in a Heart Pot with Bee modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 92 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesPlantes

Difficulté
2/3
Temps
~3 h
Taille
15.1 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet tulip pattern: a Tulip in a Heart Pot with Bee amigurumi, about 15 cm tall in DK yarn with a 2.5 mm hook. The toy is a pink tulip with a sleepy yellow bee tucked into its cup, two green leaves and a red pot decorated with a white heart. You need about 100 m of yarn: 40 m pink, 20 m green, 15 m red, 10 m white, 5 m yellow, 5 m brown and 5 m black. Plan on roughly 3 hours. A spring or Valentine's gift for flower lovers, or a pretty shelf plant that needs no watering. Spin the 3D model and follow the round-by-round pattern.

Comment crocheter Tulip in a Heart Pot with Bee

Intermédiaire · 15 cm de haut · environ 3 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 12 pièces en rangs : Pot, Pot heart, Stem, Flower cup, Petal ×3, Sleepy bee, Leaf ×2, Wing ×2 (95 rangs au total).
  2. Rembourrez et assemblez en 10 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 12 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 66

  1. Size before assembly: about 5.9 cm at the widest, 6.1 cm long; 23 rounds.
  2. Change to white (pull it through on the last yarn-over of R15).
  3. Change to brown (pull it through on the last yarn-over of R18).
  4. → Start stuffing (firmly) and keep adding as you decrease.
  5. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Flat motif — heart (worked in rounds, one layer of fabric), about 3.5 × 3.5 cm; 3 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. Size before assembly: about 1.1 cm at the widest, 3.4 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 4.6 cm at the widest, 3.2 cm long; 14 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 3.7 cm at the widest, 4.7 cm long; 15 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 9 mm thick.<!-- flattened 75 % -->

  1. Size before assembly: about 3 cm at the widest, 2.1 cm long; 9 rounds.
  2. Change to black (pull it through on the last yarn-over of R2).
  3. Change to yellow (pull it through on the last yarn-over of R3).
  4. Change to black (pull it through on the last yarn-over of R7).
  5. → Start stuffing (moderately) and keep adding as you decrease.
  6. Change to yellow (pull it through on the last yarn-over of R8).
  7. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.8 cm at the widest, 7 cm long; 20 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 3 mm thick.<!-- flattened 85 % -->

  1. A flat circle about 1.4 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Embroidery in black thread (on the sleepy bee) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 4 and 5, 1 st from the centre front line, toward the toy's left ) → (in round 5, 1 st from the centre front line, toward the toy's left ) → (between rounds 4 and 5, 1.5 st from the centre front line, toward the toy's left ).

Pot · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done