amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Plantes

Tulip modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 97 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesPlantes

Difficulté
2/3
Temps
~4 h
Taille
17.3 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

This free crochet tulip pattern makes a winking pink tulip growing in a little light blue pot. The amigurumi tulip has a soft pink flower cup wrapped in three deeper rose petals whose tips form the classic tulip crown, a playful wink, rosy cheeks, a green stem and two long pointed leaves. Every piece is worked in the round in single crochet with DK yarn and a 2.5 mm hook; the petals and leaves are lightly stuffed and pressed flat, there is one 12 mm safety eye, and the plant stands about 17 cm (7 in) tall. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to see where each petal goes, a sweet spring gift.

Comment crocheter Tulip

Intermédiaire · 17 cm de haut · environ 4 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 10 pièces en rangs : Pot, Stem, Flower cup, Petal ×3, Leaf ×2, Cheek ×2 (97 rangs au total).
  2. Rembourrez et assemblez en 7 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 12 prêts

Dans le même genre

Tout dans plantes →
  • Aperçu de Baby Tree Creature in a Pot
    Générateur
    CrocheterRemix

    Baby Tree Creature in a Pot

    par le générateur de modèles

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 58

  1. Size before assembly: about 5.9 cm at the widest, 6.1 cm long; 23 rounds.
  2. Change to white (pull it through on the last yarn-over of R15).
  3. Change to brown (pull it through on the last yarn-over of R18).
  4. → Start stuffing (firmly) and keep adding as you decrease.
  5. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.1 cm at the widest, 4.5 cm long; 12 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 5.9 cm at the widest, 6.3 cm long; 23 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Of these: back — 1; side — 2 (left and right). Size before assembly: about 3.7 cm at the widest, 5.5 cm long; 17 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 9 mm thick.<!-- flattened 75 % -->

  1. Size before assembly: about 1.8 cm at the widest, 7 cm long; 20 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 3 mm thick.<!-- flattened 85 % --> Bend ≈ 28° around round 12<!-- the bend spreads over 5 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's left on the finished toy (on the piece: in round 12, 3 st from the centre front line, toward the toy's left <!-- st 3.19 left -->). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 12 and 13 together. Bend the second piece as a mirror image.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eye with a printed glint 12 mm (on the flower cup): in round 11, 2.5 st from the centre front line, toward the toy's left .
  • Embroidery in dark brown thread (on the flower cup), straight stitches through: (between rounds 10 and 11, 3.5 st from the centre front line, toward the toy's right ) → (in round 11, 3 st from the centre front line, toward the toy's right ) → (between rounds 11 and 12, 2.5 st from the centre front line, toward the toy's right ) → (in round 11, 2 st from the centre front line, toward the toy's right ) → (between rounds 10 and 11, 1.5 st from the centre front line, toward the toy's right ).
  • Embroidery in dark brown thread (on the flower cup), straight stitches through: (between rounds 9 and 10, 0.5 st from the centre front line, toward the toy's right ) → (in round 9, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 8 and 9, on the centre front line ) → (in round 9, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 9 and 10, 0.5 st from the centre front line, toward the toy's left ).

Pot · R1–R5

MR××××××VVVVVV×V×V×V

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Mushroom Keychain
    Générateur
    CrocheterRemix

    Mushroom Keychain

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Cactus Keychain
    Générateur
    CrocheterRemix

    Cactus Keychain

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Tulip in a Heart Pot with Bee
    Générateur
    CrocheterRemix

    Tulip in a Heart Pot with Bee

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Shy Rose in a Mustard Pot
    Générateur
    CrocheterRemix

    Shy Rose in a Mustard Pot

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Mushroom Couple Cap to Cap
    Générateur
    CrocheterRemix

    Mushroom Couple Cap to Cap

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Succulent Trio in a Long Pot
    Générateur
    CrocheterRemix

    Succulent Trio in a Long Pot

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Mushroom Family of Three
    Générateur
    CrocheterRemix

    Mushroom Family of Three

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Monstera in a Pot with a Cat
    Générateur
    CrocheterRemix

    Monstera in a Pot with a Cat

    par le générateur de modèles

    Difficulté
    2/3
    Bizarrerie
    2/5
    Réalisé
    0
  • Aperçu de Tiny Desk Cactus with a Bee
    Générateur
    CrocheterRemix

    Tiny Desk Cactus with a Bee

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Christmas Wreath with a Face
    Générateur
    CrocheterRemix

    Christmas Wreath with a Face

    par le générateur de modèles

    Difficulté
    1/3
    Bizarrerie
    1/5
    Réalisé
    0
  • Aperçu de Smiling Pinecone Ornament
    Générateur
    CrocheterRemix

    Smiling Pinecone Ornament

    par le générateur de modèles

    Difficulté
    3/3
    Bizarrerie
    1/5
    Réalisé
    0
  • ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done