Receita de Seed Bulb Dino de crochê (PDF grátis)

R1with bulbteal: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7(5 sc, inc) ×6(42)
R83 sc, (inc, 6 sc) ×5, inc, 3 sc(48)
R9(BLO)48 sc(48)
R10–1348 sc(48)
R147 sc, (dec, 14 sc) ×2, dec, 7 sc(45)
R1545 sc(45)
R167 sc, (dec, 13 sc) ×2, dec, 6 sc(42)
R1742 sc(42)
R183 sc, (dec, 5 sc) ×5, dec, 2 sc(36)
Size before assembly: about 6.6 cm at the widest, 5.2 cm long; 18 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1starting in the 2nd ch from hook: sc 2, 3 sc in the last ch; continue along the other side of the chain: sc 1, 2 sc in the last ch (the one you made the first sc in)(8)
R2(inc ×3, 1 sc) ×2(14)
R31 sc, inc, 1 sc, inc, 1 sc, inc, 3 sc, inc, 1 sc, inc, 1 sc, inc(20)
R42 sc, inc, 1 sc, inc, 1 sc, inc, 6 sc, inc, 1 sc, inc, 1 sc, inc, 2 sc(26)
R53 sc, inc, 1 sc, inc, 1 sc, inc, 9 sc, inc, 1 sc, inc, 1 sc, inc, 4 sc(32)
R65 sc, inc, 1 sc, inc, 1 sc, inc, 12 sc, inc, 1 sc, inc, 1 sc, inc, 5 sc(38)
R77 sc, inc, 1 sc, inc, 1 sc, inc, 15 sc, inc, 1 sc, inc, 1 sc, inc, 6 sc(44)
R88 sc, inc, 1 sc, inc, 1 sc, inc, 18 sc, inc, 1 sc, inc, 1 sc, inc, 8 sc(50)
R99 sc, inc, 1 sc, inc, 1 sc, inc, 21 sc, inc, 1 sc, inc, 1 sc, inc, 10 sc(56)
R1056 sc(56)
R1111 sc, inc, 1 sc, inc, 1 sc, inc, 24 sc, inc, 1 sc, inc, 1 sc, inc, 11 sc(62)
R12–1562 sc(62)
R16(4 sc, dec, 8 sc, dec, 8 sc, dec, 5 sc) ×2(56)
R1756 sc(56)
R18(4 sc, dec, 7 sc, dec, 7 sc, dec, 4 sc) ×2(50)
R19(6 sc, dec, 6 sc, dec, 6 sc, dec, 1 sc) ×2(44)
R20(3 sc, dec, 5 sc, dec, 5 sc, dec, 3 sc) ×2(38)
R21(4 sc, dec, 4 sc, dec, 4 sc, dec, 1 sc) ×2(32)
R22(2 sc, dec, 3 sc, dec, 3 sc, dec, 2 sc) ×2(26)
R23(2 sc, dec, 2 sc, dec, 2 sc, dec, 1 sc) ×2(20)
R24(1 sc, dec, 1 sc, dec, 1 sc, dec, 1 sc) ×2(14)
R25(dec ×3, 1 sc) ×2(8)
Size before assembly: an oval about 8.5 × 7.7 cm at the widest, 5.9 cm long; 25 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the top of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
With bulbteal: ch 4.
→ Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

R1with bulbteal: 4 sc in MR(4)
R2inc ×3, 1 sc(7)
R31 sc, inc, 1 sc, inc, 1 sc, inc, 1 sc(10)
R41 sc, inc, 2 sc, inc, 2 sc, inc, 2 sc(13)
R513 sc(13)
Size before assembly: about 2.4 cm at the widest, 1.4 cm long; 5 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 1.7 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 24 mm wide. Keep the opening a curve, hollow side forward, not a straight line.

R1with spotteal: 6 sc in MR(6)
R2(inc ×2, 1 sc) ×2(10)
Of these: no. 1 — 1; no. 2 — 2 (left and right); side — 2 (left and right). A flat circle about 1.5 cm across; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with bulbteal: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R4–618 sc(18)
R7(4 sc, dec) ×3(15)
R815 sc(15)
Size before assembly: about 2.4 cm at the widest, 2.5 cm long; 8 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with bulbteal: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R4–618 sc(18)
R7(4 sc, dec) ×3(15)
R815 sc(15)
Size before assembly: about 2.4 cm at the widest, 2.5 cm long; 8 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 15 mm (on the head): in round 14, 10 st apart (count along round 14: about 4.8 st each side of the centre front line). Iris eyered #d63a3a.
Embroidery in mouth thread (on the head), straight stitches through: (in round 17, 2.5 st from the centre front line, toward the toy's right ) → (in round 18, 1 st from the centre front line, toward the toy's right ) → (between rounds 18 and 19, on the centre front line ) → (in round 18, 1 st from the centre front line, toward the toy's left ) → (in round 17, 2.5 st from the centre front line, toward the toy's left ).
Blush about 9 mm, dry pastel or blush (on the head, both sides): between rounds 16 and 17, 6.5 st from the centre front line, toward the toy's left . Colour blushpink.