PDF A4: materiais, cada carreira com caixinha, montagem e rostinho
A free crochet donut pattern for a pink-iced donut with a smiling face and two short legs. This amigurumi donut is a soft ring in golden dough with strawberry glaze on the front, a scatter of embroidered rainbow sprinkles, rosy cheeks and cream legs, a cute plushie for a snack-loving friend. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook, has 8 mm safety eyes, and stands about 10 cm (4 in) tall. Follow it row by row with stitch counts and turn the interactive 3D model to see how the ring and the face fit together.
Como fazer Donut with Little Legs de crochê
Para iniciantes · 10 cm de altura · cerca de 2 h · fio DK · agulha de 2.5 mm
Faça as 5 partes em carreiras: Donut, Leg ×2, Cheek ×2 (26 carreiras no total).
Encha e monte em 3 etapas; cada uma acende no modelo 3D onde a parte vai.
Faça o rostinho: olhos de segurança por carreira e ponto, ou bordados para menores de 3 anos.
Cada carreira com o número de pontos está na aba Receita abaixo e no PDF grátis para imprimir.
1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.
Como é feito
Carreiras contínuas em espiral. Não feche as carreiras. Suba o marcador a cada carreira.
Size before assembly: about 8 cm at the widest, 4.9 cm long; 17 rounds.
Change to strawberry pink (pull it through on the last yarn-over of R11).
Fasten off leaving a long tail (30–40 cm) for sewing.
Insert the safety nose/eyes now, while the piece is open (positions: see “Face”).
Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.
Size before assembly: about 1.6 cm at the widest, 2.3 cm long; 7 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing.
Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.
A flat circle about 1.5 cm across; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing.
Do not stuff.
Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.
Safety eyes with a printed glint 8 mm (on the donut): in round 15, 32 st apart (count along round 15: about 1.8 st each side of the centre bottom line).
Embroidery in cocoa thread (on the donut), straight stitches through: (in round 14, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 13 and 14, 0.5 st from the centre bottom line, toward the toy's left ) → (in round 13, on the centre bottom line ) → (between rounds 13 and 14, 0.5 st from the centre bottom line, toward the toy's right ) → (in round 14, 1 st from the centre bottom line, toward the toy's right ).
Satin stitch (on the donut): in snow white thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 15° anticlockwise (looking at that surface); centred between rounds 12 and 13, 3 st from the centre top line, toward the toy's left .
Satin stitch (on the donut): in mint thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 40° anticlockwise (looking at that surface); centred in round 14, 5.5 st from the centre top line, toward the toy's left .
Satin stitch (on the donut): in sun yellow thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 20° clockwise (looking at that surface); centred between rounds 12 and 13, 12 st from the centre top line, toward the toy's left.
Satin stitch (on the donut): in sky blue thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° clockwise (looking at that surface); centred in round 14, 12.5 st from the centre top line, toward the toy's left .
Satin stitch (on the donut): in snow white thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred in round 13, 7 st from the centre bottom line, toward the toy's left .
Satin stitch (on the donut): in mint thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred in round 16, 2 st from the centre top line, toward the toy's left .
Satin stitch (on the donut): in sun yellow thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 95° clockwise (looking at that surface); centred in round 16, 5 st from the centre top line, toward the toy's left .
Abreviações
MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done
Ninguém mostrou o seu ainda. Seja a primeira pessoa.
Satin stitch (on the donut): in sky blue thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 45° clockwise (looking at that surface); centred in round 16, 8 st from the centre top line, toward the toy's left .
Satin stitch (on the donut): in snow white thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred between rounds 16 and 17, 5 st from the centre bottom line, toward the toy's left .
Satin stitch (on the donut): in mint thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 15° anticlockwise (looking at that surface); centred between rounds 12 and 13, 8.5 st from the centre bottom line, toward the toy's right .
Satin stitch (on the donut): in sun yellow thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 45° clockwise (looking at that surface); centred in round 14, 12 st from the centre top line, toward the toy's right .
Satin stitch (on the donut): in sky blue thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred between rounds 12 and 13, 11 st from the centre top line, toward the toy's right .
Satin stitch (on the donut): in snow white thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 45° clockwise (looking at that surface); centred between rounds 14 and 15, 6.5 st from the centre top line, toward the toy's right .
Satin stitch (on the donut): in mint thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 40° anticlockwise (looking at that surface); centred in round 16, 10 st from the centre top line, toward the toy's right .
Satin stitch (on the donut): in sun yellow thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred between rounds 16 and 17, 7 st from the centre top line, toward the toy's right .
Satin stitch (on the donut): in sky blue thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred in round 16, 3.5 st from the centre top line, toward the toy's right .
Satin stitch (on the donut): in snow white thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 20° clockwise (looking at that surface); centred between rounds 13 and 14, 3 st from the centre top line, toward the toy's right .
Satin stitch (on the donut): in mint thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 20° clockwise (looking at that surface); centred in round 16, 1 st from the centre top line, toward the toy's right .
