Green Christmas Grump receita de crochê

Equilibrada matematicamenteVerificado por script: nas 86 carreiras os aumentos e diminuições batem com o número de pontos.

pelo gerador de receitasFantasia

Dificuldade: 3/3
Tempo: ~4 h
Tamanho: 17.5 cm
Esquisitice: 1/5

PDF A4: materiais, cada carreira com caixinha, montagem e rostinho

A crochet amigurumi inspired by the Grinch from How the Grinch Stole Christmas! by Dr. Seuss: a sly green Christmas grump in a red Santa hat and suit. About 18 cm tall in DK yarn with a 2.5 mm hook. A free pattern with every round counted, a 3D model to turn around and a printable PDF. Unofficial fan-made design, not affiliated with or endorsed by Dr. Seuss Enterprises.

Como fazer Green Christmas Grump de crochê

Avançado · 18 cm de altura · cerca de 4 h · fio DK · agulha de 2.5 mm

Faça as 10 partes em carreiras: Body in a Santa suit, Head, White fur trim, Arm in a sleeve ×2, Leg ×2, Santa cap, Hat tip, Pompom (111 carreiras no total).
Encha e monte em 8 etapas; cada uma acende no modelo 3D onde a parte vai.
Faça o rostinho: olhos de segurança por carreira e ponto, ou bordados para menores de 3 anos.

Cada carreira com o número de pontos está na aba Receita abaixo e no PDF grátis para imprimir.

Do que você vai precisar

Marque os itens conforme for separando.

0 de 8 separados

Fio redespessura DK65 m
Fio greenespessura DK40 m
Fio whiteespessura DK20 m
Agulha de crochêde 2.5 mm1
Olhos de segurançaou borde-os para crianças pequenas2
Enchimentofibra siliconada30 g
Marcador de pontospara carreiras em espiral1
Agulha de tapeçariapara costurar as partes1

Amostra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Tudo em fantasia →

Gerador
Green Dino with a Red Saddle
pelo gerador de receitas

Remix Fazer

0 de 91 carreiras feitas

R1with white: ch 42 and join into a ring with a sl st in the first ch (do not twist); 42 sc, one in each ch of the ring(42)
R2(1 sc, inc, 2 sc, inc, 2 sc) ×6(54)
R3(8 sc, inc) ×6(60)
R4–560 sc(60)
Size before assembly: about 8 cm at the widest, 1.2 cm long; 5 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with green: 6 sc in MR(6)
R2inc ×6(12)
R3–412 sc(12)
R512 sc(12)
R62 sc, dec, 4 sc, dec, 2 sc(10)
R7–810 sc(10)
Size before assembly: about 1.6 cm at the widest, 2.6 cm long; 8 rounds.
Change to white (pull it through on the last yarn-over of R2).
Change to red (pull it through on the last yarn-over of R4).
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1starting in the 2nd ch from hook: sc 2, 3 sc in the last ch; continue along the other side of the chain: sc 1, 2 sc in the last ch (the one you made the first sc in)(8)
R2(inc ×3, 1 sc) ×2(14)
R31 sc, inc, 1 sc, inc, 1 sc, inc, 3 sc, inc, 1 sc, inc, 1 sc, inc(20)
R42 sc, inc, 1 sc, inc, 1 sc, inc, 6 sc, inc, 1 sc, inc, 1 sc, inc, 2 sc(26)
R5–826 sc(26)
R9(2 sc, dec, 2 sc, dec, 2 sc, dec, 1 sc) ×2(20)
Size before assembly: an oval about 3.8 × 3 cm at the widest, 2.7 cm long; 9 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
With red: ch 4.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with white: 6 sc in MR(6)
R2inc ×6(12)
R3(popcorns)(1 sc, popcorn) ×6(12)
R4(popcorns)(popcorn, 1 sc) ×6(12)
R512 sc(12)
R6dec ×6(6)
Size before assembly: about 1.6 cm at the widest, 1.9 cm long; 6 rounds.
→ Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 18 mm (on the head): between rounds 16 and 17, 9 st apart (count along round 16: about 4.6 st each side of the centre front line). Iris iris #f2e23a.
Embroidery in browc thread (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 13 and 14, 2 st from the centre front line, toward the toy's left ) → (between rounds 12 and 13, 4 st from the centre front line, toward the toy's left ) → (in round 12, 6 st from the centre front line, toward the toy's left ).
Satin stitch (on the head): in nosec thread, a oval about 7 mm wide and 4.5 mm tall, horizontal stitches; centred between rounds 20 and 21, on the centre front line .
Embroidery in mouthc thread (on the head), straight stitches through: (between rounds 21 and 22, 6 st from the centre front line, toward the toy's right ) → (in round 23, 3.5 st from the centre front line, toward the toy's right ) → (in round 24, 1.5 st from the centre front line, toward the toy's right ) → (in round 24, on the centre front line) → (in round 24, 1.5 st from the centre front line, toward the toy's left ) → (in round 23, 3.5 st from the centre front line, toward the toy's left ) → (between rounds 21 and 22, 6 st from the centre front line, toward the toy's left ).