Receita de Gingerbread House Ornament fácil de crochê (PDF grátis)

R1starting in the 2nd ch from hook: sc 4, 3 sc in the last ch; continue along the other side of the chain: sc 3, 2 sc in the last ch (the one you made the first sc in)(12)
R2(inc ×2, 1 sc) ×4(20)
R31 sc, inc, 1 sc, inc, 1 sc, inc, 1 sc, inc, 4 sc, inc, 1 sc, inc, 1 sc, inc, 1 sc, inc, 1 sc(28)
R43 sc, inc, 1 sc, inc, 1 sc, inc, 1 sc, inc, 8 sc, inc, 1 sc, inc, 1 sc, inc, 1 sc, inc, 3 sc(36)
R55 sc, inc, 1 sc, inc, 1 sc, inc, 1 sc, inc, 12 sc, inc, 1 sc, inc, 1 sc, inc, 1 sc, inc, 5 sc(44)
R6(BLO)44 sc(44)
R7–1644 sc(44)
R17(3 sc, dec, 3 sc, dec, 1 sc) ×4(36)
Size before assembly: an oval about 5 × 3.8 cm at the widest, 3.8 cm long; 17 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the bottom of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
With ginger: ch 6.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1starting in the 2nd ch from hook: sc 9, 3 sc in the last ch; continue along the other side of the chain: sc 8, 2 sc in the last ch (the one you made the first sc in)(22)
R23 sc, inc, 1 sc, inc, 1 sc, inc, 7 sc, inc, 1 sc, inc, 1 sc, inc, 2 sc(28)
R34 sc, inc, 1 sc, inc, 1 sc, inc, 10 sc, inc, 1 sc, inc, 1 sc, inc, 4 sc(34)
R45 sc, inc, 1 sc, inc, 1 sc, inc, 13 sc, inc, 1 sc, inc, 1 sc, inc, 6 sc(40)
R57 sc, inc, 1 sc, inc, 1 sc, inc, 16 sc, inc, 1 sc, inc, 1 sc, inc, 7 sc(46)
R6–746 sc(46)
R846 sc(46)
Size before assembly: an oval about 5.7 × 3 cm at the widest, 1.5 cm long; 8 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the top of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns.
With icing: ch 11.
Change to dark ginger (pull it through on the last yarn-over of R2).
Change to icing (pull it through on the last yarn-over of R7).
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Row 1with door brown: into a magic ring; 3 sc(3)
Row 2ch 1 and turn (not counted as a st); inc ×3(6)
Row 3ch 1 and turn (not counted as a st); (1 sc, inc) ×3(9)
Row 4ch 1 and turn (not counted as a st); (1 sc, inc, 1 sc) ×3(12)
Row 5ch 1 and turn (not counted as a st); (3 sc, inc) ×3(15)
Flat motif — half circle (worked in turned rows, one layer of fabric), about 1.4 × 2.9 cm; 5 rows.
Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

R1with gold: 5 sc in MR(5)
R21 sc, inc, 1 sc, inc, 1 sc(7)
A flat circle about 1.1 cm across; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Round 1with frost blue: into a magic ring; 6 sc(6)
Round 2inc ×6(12)
Round 3(1 sc, inc) ×6(18)
Flat motif — circle (worked in rounds, one layer of fabric), about 1.7 × 1.7 cm; 3 rows.
Change to icing.
Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

R1with red: 6 sc in MR(6)
R2(inc ×2, 1 sc) ×2(10)
A flat circle about 1.2 cm across; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with green: 6 sc in MR(6)
R2(inc ×2, 1 sc) ×2(10)
A flat circle about 1.2 cm across; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with gold: ch 16 and join into a ring with a sl st in the first ch (do not twist); 16 sc, one in each ch of the ring(16)
R216 sc(16)
Size before assembly: about 1.5 cm at the widest (lies flat); 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in gold (same rounds, no colour changes).
Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

Strap (on the house walls): with icing, ch 34 (≈ 7.5 cm); for a firmer strap sl st back along it. Sew it along (in round 14, 10.5 st from the centre front line, toward the toy's right ) → (in round 13, 8.5 st from the centre front line, toward the toy's right ) → (in round 14, 7 st from the centre front line, toward the toy's right ) → (in round 13, 5 st from the centre front line, toward the toy's right ) → (in round 14, 3.5 st from the centre front line, toward the toy's right ) → (in round 13, 1.5 st from the centre front line, toward the toy's right ) → (in round 14, on the centre front line) → (in round 13, 1.5 st from the centre front line, toward the toy's left ) → (in round 14, 3.5 st from the centre front line, toward the toy's left ) → (in round 13, 5 st from the centre front line, toward the toy's left ) → (in round 14, 7 st from the centre front line, toward the toy's left ) → (in round 13, 8.5 st from the centre front line, toward the toy's left ) → (in round 14, 10.5 st from the centre front line, toward the toy's left ), catching it every 2–3 ch.