amigurumi
  • Catálogo
  • Ateliê
Criar
amigurumi
  • Catálogo
  • Receitas por animal
  • Sobre
  • Ajuda
  • App para ChatGPT e Claude
  • Termos
  • Privacidade

Receitas sem contas e sem confusão. Com modelagem geométrica por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animais

Puppy with Reindeer Antlers Ornament receita de crochê

  • Equilibrada matematicamenteVerificado por script: nas 70 carreiras os aumentos e diminuições batem com o número de pontos.

pelo gerador de receitasAnimais

Dificuldade
2/3
Tempo
~2 h
Tamanho
7.4 cm
Esquisitice
1/5
FazerFazer um remix
Baixar PDF grátis para imprimir

PDF A4: materiais, cada carreira com caixinha, montagem e rostinho

A free crochet Christmas dog pattern for a round cream puppy with floppy brown ears, a red nose and a reindeer antler headband. This amigurumi puppy winks with one eye, wears a brown patch on the other, sticks out a tiny pink tongue and has a green collar. It is worked in the round in single crochet with fingering yarn and a 2 mm hook and is about 7.4 cm (3 in) tall; the face is embroidered, and the ears, nose, antlers, paws and loop are sewn on, with a red chain headband across the head. The page gives a row-by-row pattern with stitch counts and an interactive 3D model to check every piece.

Como fazer Puppy with Reindeer Antlers Ornament de crochê

Intermediário · 7 cm de altura · cerca de 2 h · fio fingering · agulha de 2 mm

  1. Faça as 14 partes em carreiras: Head-body ball, Muzzle, Red nose, Eye patch, Floppy ear ×2, Antler ×2, Antler tine ×2, Paw ×2, Green collar, Hanging loop (70 carreiras no total).
  2. Encha e monte em 10 etapas; cada uma acende no modelo 3D onde a parte vai.
  3. Faça o rostinho: olhos de segurança por carreira e ponto, ou bordados para menores de 3 anos.

Cada carreira com o número de pontos está na aba Receita abaixo e no PDF grátis para imprimir.

Do que você vai precisar

Marque os itens conforme for separando.

0 de 12 separados

RemixFazer

Amostra

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Como é feito

Carreiras contínuas em espiral. Não feche as carreiras. Suba o marcador a cada carreira.

Partes

Idioma da receitaenrudefrBaixar PDF grátis para imprimirPDF
0 de 58 carreiras feitas

  1. Size before assembly: about 5.4 cm at the widest, 5.4 cm long; 26 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat oval about 1.9 × 1.6 cm; 3 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With snow white: ch 3.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 0.9 cm at the widest, 1 cm long; 4 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 5 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 1.8 cm across; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2.5 cm at the widest, 3 cm long; 12 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 2.3 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 4.2 mm thick); about 25 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) --> Bend ≈ 90° around round 11<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 6 twist 1 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 11, 1 st from the centre bottom line, toward the back <!-- st 0.95 back -->). If the ear sticks out, smooth it down along the head by hand.

  1. Size before assembly: about 0.7 cm at the widest, 2.6 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 25° around round 5<!-- the bend spreads over 5 rounds -->. After stuffing, bend the piece so the inner side of the bend faces forward on the finished toy (on the piece: in round 5, on the centre front line). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 4 and 5 together. Bend the second piece as a mirror image.

  1. Size before assembly: about 0.5 cm at the widest, 1.2 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 0.8 cm at the widest, 0.7 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 4 mm thick.<!-- flattened 50 % -->

  1. Size before assembly: about 4.2 cm at the widest, 0.8 cm long; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.5 cm at the widest (lies flat); 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in soft gold (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Embroidered eyes (on the head-body ball): in black thread, a oval about 5.4 mm wide and 6.6 mm tall, horizontal stitches; centred between rounds 16 and 17, 4.5 st from the centre front line, toward the toy's right .
  • Eye glint (on the head-body ball): in snow white thread over the embroidered eye, a oval about 1.8 mm wide and 1.8 mm tall, horizontal stitches; centred between rounds 16 and 17, 4.5 st from the centre front line, toward the toy's right , then moved 1 mm to the right and 1.6 mm up (looking at the toy's face).
  • Strap (on the head-body ball) (2, symmetric: the toy's left side is described, the right is its mirror image): with bright red, ch 17 (≈ 3.8 cm); for a firmer strap sl st back along it. Sew it along (between rounds 16 and 17, 13 st from the centre front line, toward the toy's left ) → (in round 20, 8 st from the centre front line, toward the toy's left ) → (in round 23, 3.5 st from the centre front line, toward the toy's left ) → (in round 25, 0.5 st from the centre front line, toward the toy's left ) → (in round 26, on the centre front line), catching it every 2–3 ch.
  • Embroidery in black thread (on the head-body ball), straight stitches through: (in round 16, 3 st from the centre front line, toward the toy's left ) → (between rounds 16 and 17, 4 st from the centre front line, toward the toy's left ) → (in round 17, 5 st from the centre front line, toward the toy's left ) → (between rounds 16 and 17, 5.5 st from the centre front line, toward the toy's left ) → (in round 16, 6.5 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the muzzle): in tongue pink thread, a oval about 5 mm wide and 6 mm tall, horizontal stitches; centred in round 2, on the centre bottom line.
  • Embroidery in dark brown thread (on the muzzle), straight stitches through: (between rounds 1 and 2, on the centre bottom line ) → (in round 2, 0.5 st from the centre bottom line, toward the toy's right ) → (in round 2, 1 st from the centre bottom line, toward the toy's right ).
  • Embroidery in dark brown thread (on the muzzle), straight stitches through: (between rounds 1 and 2, on the centre bottom line ) → (in round 2, 0.5 st from the centre bottom line, toward the toy's left ) → (in round 2, 1 st from the centre bottom line, toward the toy's left ).

Head-body ball · R1–R5

MR××××××VVVVVV×V×V×

Ninguém mostrou o seu ainda. Seja a primeira pessoa.

Entre para mostrar o seu

Nenhuma pergunta ainda

Faça a primeira: a autora e o assistente de IA leem aqui.

    Deixe este amigurumi com a sua cara

    Abra no editor 3D: mude as cores, o tamanho de qualquer peça ou peça à IA em palavras. Sua versão ganha a própria receita.

    Experimente pedir:

    • Pinte em tons pastel
    • Deixe mais gordinho
    • Coloque um cachecol pequeno
    Abrir no editor 3DTransforme uma foto em receita de crochê
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviações

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done