amigurumi
  • Catálogo
  • Ateliê
Criar
amigurumi
  • Catálogo
  • Receitas por animal
  • Sobre
  • Ajuda
  • App para ChatGPT e Claude
  • Termos
  • Privacidade

Receitas sem contas e sem confusão. Com modelagem geométrica por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animais marinhos

Seahorse Holding a Pearl receita de crochê

  • Equilibrada matematicamenteVerificado por script: nas 99 carreiras os aumentos e diminuições batem com o número de pontos.

pelo gerador de receitasAnimais marinhos

Dificuldade
3/3
Tempo
~3 h
Tamanho
14.5 cm
Esquisitice
1/5
FazerFazer um remix
Baixar PDF grátis para imprimir

PDF A4: materiais, cada carreira com caixinha, montagem e rostinho

Free crochet seahorse pattern: a Seahorse Holding a Pearl amigurumi, about 14 cm tall in DK yarn with a 2.5 mm hook. The coral-pink seahorse has peach stripes around its tummy, a yellow back fin, a small crown of peach tufts and a tail curled around a white pearl. You need about 80 m of yarn: 50 m coral, 10 m peach, 10 m off white, 5 m yellow and 5 m pink. Plan on roughly 3 hours. A sweet beach-house decoration or a gift for ocean lovers. You can spin the 3D model and follow the round-by-round pattern.

Como fazer Seahorse Holding a Pearl de crochê

Avançado · 15 cm de altura · cerca de 3 h · fio DK · agulha de 2.5 mm

  1. Faça as 10 partes em carreiras: Body, Head, Tail, Tube snout, Crown lobe ×2, Fin, Cheek ×2, Pearl (106 carreiras no total).
  2. Encha e monte em 9 etapas; cada uma acende no modelo 3D onde a parte vai.
  3. Faça o rostinho: olhos de segurança por carreira e ponto, ou bordados para menores de 3 anos.

Cada carreira com o número de pontos está na aba Receita abaixo e no PDF grátis para imprimir.

Do que você vai precisar

Marque os itens conforme for separando.

0 de 10 separados

RemixFazer

Amostra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Como é feito

Carreiras contínuas em espiral. Não feche as carreiras. Suba o marcador a cada carreira.

Partes

Idioma da receitaenrudefrBaixar PDF grátis para imprimirPDF
0 de 79 carreiras feitas

  1. Size before assembly: about 6.6 cm at the widest, 5.4 cm long; 19 rounds.
  2. Change to peach (pull it through on the last yarn-over of R7).
  3. Change to coral (pull it through on the last yarn-over of R8).
  4. Change to peach (pull it through on the last yarn-over of R9).
  5. Change to coral (pull it through on the last yarn-over of R10).
  6. Change to peach (pull it through on the last yarn-over of R11).
  7. Change to coral (pull it through on the last yarn-over of R12).
  8. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 5.8 cm at the widest, 5.2 cm long; 20 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 3.3 cm at the widest, 11 cm long; 29 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 480° around round 28<!-- the bend spreads over 2 rounds --><!-- coil 3 -->. The piece rolls up into a spiral (about 1.3 turns) from round 28 to its tip: after stuffing, roll it up starting from the tip (round 1) toward the side that faces toward the toy's left on the finished toy; the turns lie close, each wider than the last. From the tip to round 28 tack neighbouring turns together with 2–3 stitches of matching yarn every 3–4 rounds and hide the yarn inside.

  1. Size before assembly: about 1.6 cm at the widest, 3.8 cm long; 11 rounds.
  2. Change to coral (pull it through on the last yarn-over of R2).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Of these: mid — 1; back — 1. Size before assembly: about 1.2 cm at the widest, 2.5 cm long; 7 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Flat motif — half circle (worked in turned rows, one layer of fabric), about 3 × 5.3 cm; 7 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 3.8 cm at the widest, 2.5 cm long; 11 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10 mm (on the head): between rounds 12 and 13, 12 st apart (count along round 12: about 6.1 st each side of the centre front line).
  • Satin stitch (on the tube snout): in brown thread, a oval about 3.5 mm wide and 3.5 mm tall, horizontal stitches; centred in round 1, on the centre top line .
  • Embroidery in brown thread (on the tube snout), straight stitches through: (between rounds 7 and 8, 0.5 st from the centre bottom line, toward the toy's left ) → (in round 8, on the centre bottom line ) → (between rounds 7 and 8, 0.5 st from the centre bottom line, toward the toy's right ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Ninguém mostrou o seu ainda. Seja a primeira pessoa.

Entre para mostrar o seu

Nenhuma pergunta ainda

Faça a primeira: a autora e o assistente de IA leem aqui.

    Deixe este amigurumi com a sua cara

    Abra no editor 3D: mude as cores, o tamanho de qualquer peça ou peça à IA em palavras. Sua versão ganha a própria receita.

    Experimente pedir:

    • Pinte em tons pastel
    • Deixe mais gordinho
    • Coloque um cachecol pequeno
    Abrir no editor 3DTransforme uma foto em receita de crochê
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviações

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done