amigurumi
  • Catálogo
  • Ateliê
Criar
amigurumi
  • Catálogo
  • Receitas por animal
  • Sobre
  • Ajuda
  • App para ChatGPT e Claude
  • Termos
  • Privacidade

Receitas sem contas e sem confusão. Com modelagem geométrica por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animais

Racing Snail in a Helmet receita de crochê

  • Equilibrada matematicamenteVerificado por script: nas 89 carreiras os aumentos e diminuições batem com o número de pontos.

pelo gerador de receitasAnimais

Dificuldade
2/3
Tempo
~3 h
Tamanho
8 cm
Esquisitice
1/5
FazerFazer um remix
Baixar PDF grátis para imprimir

PDF A4: materiais, cada carreira com caixinha, montagem e rostinho

Free crochet snail pattern: a Racing Snail in a Helmet amigurumi, about 8 cm tall in DK yarn with a 2.5 mm hook. A green snail wears a white helmet with a red stripe, its eye stalks poking out, and carries a red shell with a white circle and a big number 1. You need about 90 m of yarn: 45 m green, 20 m white, 15 m red, 5 m black and 5 m pink. Plan on roughly 3 hours. A funny little gift for a racing fan, or a slow-and-steady mascot for your shelf. You can spin the 3D model and work through the pattern round by round.

Como fazer Racing Snail in a Helmet de crochê

Intermediário · 8 cm de altura · cerca de 3 h · fio DK · agulha de 2.5 mm

  1. Faça as 8 partes em carreiras: Snail body, Head, Shell, Cheek ×2, Racing helmet, Eye stalk ×2 (89 carreiras no total).
  2. Encha e monte em 6 etapas; cada uma acende no modelo 3D onde a parte vai.
  3. Faça o rostinho: olhos de segurança por carreira e ponto, ou bordados para menores de 3 anos.

Cada carreira com o número de pontos está na aba Receita abaixo e no PDF grátis para imprimir.

Do que você vai precisar

Marque os itens conforme for separando.

0 de 10 separados

RemixFazer

Amostra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Como é feito

Carreiras contínuas em espiral. Não feche as carreiras. Suba o marcador a cada carreira.

Partes

Idioma da receitaenrudefrBaixar PDF grátis para imprimirPDF
0 de 62 carreiras feitas

  1. Size before assembly: about 5.8 cm at the widest, 9.8 cm long; 31 rounds.
  2. → Start stuffing (moderately) and keep adding as you decrease.
  3. Press the piece flat to about 3.5 cm thick (oval cross-section).<!-- press the piece flat by 40 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 4.8 cm at the widest, 3.5 cm long; 15 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 6.4 cm at the widest, 4.9 cm long; 21 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's line on the toy's left side (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. → Start stuffing (moderately) and keep adding as you decrease.
  3. Press the piece flat to about 3.2 cm thick (oval cross-section).<!-- press the piece flat by 50 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 5.6 cm at the widest, 1.9 cm long; 10 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.1 cm at the widest, 3.4 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eye with a printed glint 10 mm (on the eye stalk) (2: one on each eye stalk; the left one is described, the right is its mirror): between rounds 5 and 6, on the centre front line.
  • Embroidery in black thread (on the head), straight stitches through: (between rounds 9 and 10, 1.5 st from the centre front line, toward the toy's right ) → (in round 10, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 10 and 11, on the centre front line ) → (in round 10, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 9 and 10, 1.5 st from the centre front line, toward the toy's left ).
  • Strap (on the shell): with black, ch 9 (≈ 2.5 cm); for a firmer strap sl st back along it. Sew it along (in round 8, 1 st from the line on the toy's left side, toward the back ) → (in round 11, 1 st from the line on the toy's left side, toward the back ) → (between rounds 14 and 15, 1 st from the line on the toy's left side, toward the back ), catching it every 2–3 ch.
  • Strap (on the shell): with black, ch 5 (≈ 1.3 cm); for a firmer strap sl st back along it. Sew it along (in round 8, 1 st from the line on the toy's left side, toward the back ) → (in round 9, on the line on the toy's left side) → (between rounds 10 and 11, 1 st from the line on the toy's left side, toward the front ), catching it every 2–3 ch.
  • Strap (on the shell): with black, ch 9 (≈ 2.5 cm); for a firmer strap sl st back along it. Sew it along (in round 8, 1 st from the line on the toy's right side, toward the back ) → (in round 11, 1 st from the line on the toy's right side, toward the back ) → (between rounds 14 and 15, 1 st from the line on the toy's right side, toward the back ), catching it every 2–3 ch.
  • Strap (on the shell): with black, ch 5 (≈ 1.3 cm); for a firmer strap sl st back along it. Sew it along (in round 8, 1 st from the line on the toy's right side, toward the back ) → (in round 9, on the line on the toy's right side) → (between rounds 10 and 11, 1 st from the line on the toy's right side, toward the front ), catching it every 2–3 ch.

Snail body · R1–R5–6

MR××××××VVVVVV×V×V×

Ninguém mostrou o seu ainda. Seja a primeira pessoa.

Entre para mostrar o seu

Nenhuma pergunta ainda

Faça a primeira: a autora e o assistente de IA leem aqui.

    Deixe este amigurumi com a sua cara

    Abra no editor 3D: mude as cores, o tamanho de qualquer peça ou peça à IA em palavras. Sua versão ganha a própria receita.

    Experimente pedir:

    • Pinte em tons pastel
    • Deixe mais gordinho
    • Coloque um cachecol pequeno
    Abrir no editor 3DTransforme uma foto em receita de crochê
    V×V×V×V×V××V××V××V××V××V×××××××××××××××××××××××××
    × scV incΛ dec

    Abreviações

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done