amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Meerestiere

Baby Dolphin Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 80 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorMeerestiere

Schwierigkeit
2/3
Zeit
~3 Std.
Größe
8.5 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

A free crochet dolphin pattern for a smiling baby dolphin that lies on its belly with its tail flukes spread wide. This amigurumi dolphin is soft blue-grey with a white underside, a short rounded beak, a swept-back dorsal fin, two little flippers, big shiny eyes and pink cheeks. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook and is about 15.5 cm (6 in) long and 8.5 cm (3.3 in) tall, with 12 mm safety eyes and the fins and beak sewn on. Follow it row by row with stitch counts and turn the interactive 3D model to see where every piece goes, a sweet summer gift for an ocean lover.

Baby Dolphin häkeln

Mittel · 9 cm hoch · etwa 3 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 9 Teile in Runden: Body, Beak (rostrum), Dorsal fin, Flipper ×2, Tail fluke lobe ×2, Cheek ×2 (insgesamt 80 Runden).
  2. Fülle und montiere in 6 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 9 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 69 Runden fertig

  1. Size before assembly: about 6.7 cm at the widest, 10.2 cm long; 32 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 2.9 × 2.1 cm at the widest, 4.1 cm long; 12 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. With bluegrey: ch 4.
  3. colours of round 1 in order: 2 sc in bluegrey, 3 sc in belly, 3 sc in bluegrey
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 15 %).

  1. Size before assembly: about 2.6 cm at the widest, 3.3 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 8 mm thick.<!-- flattened 70 % --> Bend ≈ 40° around round 4<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 4, 2.5 st from the line on the toy's left side, toward the back). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 4 and 5 together.

  1. Size before assembly: about 2.4 cm at the widest, 2.9 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 8 mm thick.<!-- flattened 65 % -->

  1. Size before assembly: about 3.7 cm at the widest, 5.1 cm long; 15 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 1.1 cm thick.<!-- flattened 70 % -->

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 12 mm (on the Body): between rounds 26 and 27, 14 st apart (count along round 26: about 6.8 st each side of the centre top line).
  • Embroidery in navy thread (on the Beak (rostrum)) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 1 and 2, 2 st from the centre top line, toward the toy's left ) → (in round 4, 6 st from the centre top line, toward the toy's left) → (between rounds 7 and 8, 6.5 st from the centre top line, toward the toy's left ).

Body · R1–R3

MR×××××××V×V×V××V××V

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    ××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done