amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Baby Reindeer Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 125 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
3/3
Zeit
~4 Std.
Größe
14.7 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

A free crochet reindeer pattern for a sitting brown baby reindeer with branched cream antlers, a red ball nose and a striped scarf. This amigurumi reindeer has a cream muzzle, big cream-lined ears, rosy cheeks, dark hoof pads and a red-and-white scarf with one end hanging down the front. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook, ends up about 15 cm (5.8 in) tall, and has 11 mm safety eyes (embroider them for small children); the antlers, ears and nose ball are sewn on. Follow it row by row with stitch counts and turn the interactive 3D model to see where every piece goes, a cosy Christmas gift.

Baby Reindeer häkeln

Fortgeschritten · 15 cm hoch · etwa 4 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 21 Teile in Runden: Body, Head, Muzzle, Ear ×2, Arm ×2, Leg ×2, Hoof ×2, Tail, Antler ×2, Antler tine ×4, Red nose ball, Scarf, Scarf end (insgesamt 125 Runden).
  2. Fülle und montiere in 14 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 11 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 90 Runden fertig

  1. Size before assembly: about 6.7 cm at the widest, 4.9 cm long; 17 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 8.4 cm at the widest, 6.9 cm long; 28 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 3 × 2.2 cm at the widest, 1.4 cm long; 5 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With cream: ch 4.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 3 cm at the widest, 3.6 cm long; 11 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 2.9 mm deep in front, a rounded back; about 30 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) -->

  1. Size before assembly: about 2 cm at the widest, 3.6 cm long; 11 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 3.3 cm at the widest, 3.4 cm long; 11 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 2.3 cm across; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.5 cm at the widest, 1.2 cm long; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.2 cm at the widest, 4.2 cm long; 12 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 25° around round 6<!-- the bend spreads over 6 rounds -->. After stuffing, bend the piece so the inner side of the bend faces forward on the finished toy (on the piece: in round 6, on the centre front line). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 6 and 7 together. Bend the second piece as a mirror image.

  1. Of these: no. 1 — 2 (left and right); low — 2 (left and right). Size before assembly: about 0.9 cm at the widest, 2.4 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.2 cm at the widest, 1.3 cm long; 4 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 5 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 5.9 cm at the widest, 1.8 cm long; 3 rounds.
  2. Change to white (pull it through on the last yarn-over of R1).
  3. Change to red (pull it through on the last yarn-over of R2).
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: an oval about 1.7 × 0.5 cm at the widest, 3.2 cm long; 9 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With white: ch 5.
  3. Change to red (pull it through on the last yarn-over of R2).
  4. Change to white (pull it through on the last yarn-over of R4).
  5. Change to red (pull it through on the last yarn-over of R6).
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 90 % --> Bend ≈ 75° around round 6<!-- the bend spreads over 3 rounds -->. Bend the piece so the inner side of the bend faces down on the finished toy (on the piece: in round 6, on the centre bottom line). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 6 and 7 together.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the head): in round 15, 9 st apart (count along round 15: about 4.3 st each side of the centre front line).
  • Embroidery in chocolate thread (on the muzzle), straight stitches through: (in round 2, on the centre bottom line) → (in round 3, on the centre bottom line ).
  • Embroidery in chocolate thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 3, on the centre bottom line ) → (in round 3, 1 st from the centre bottom line, toward the toy's left ) → (in round 3, 1.5 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 1.5 st from the centre bottom line, toward the toy's left ).
  • Blush about 10 mm, dry pastel or blush (on the head, both sides): in round 18, 7.5 st from the centre front line, toward the toy's left . Colour blush.

Abkürzungen

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung