amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Buck Tooth Bunny Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 61 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
1/3
Zeit
~2 Std.
Größe
7.9 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet bunny pattern: a Buck Tooth Bunny amigurumi, about 8 cm tall in DK yarn with a 2.5 mm hook. A round grey bunny with long floppy ears lined in pink, crossed derpy eyes, a pink nose and two big white buck teeth. You need about 70 m of yarn: 55 m grey, 5 m pink, 5 m light grey and 5 m coral. Plan on roughly 2 hours. It is a goofy little gift for anyone who needs a laugh, or a funny shelf buddy for bunny fans. Spin the 3D model and follow the round-by-round pattern.

Buck Tooth Bunny häkeln

Für Anfänger · 8 cm hoch · etwa 2 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 8 Teile in Runden: Body with head, Long floppy ear ×2, Foot ×2, Pompom tail, Cheek ×2 (insgesamt 61 Runden).
  2. Fülle und montiere in 5 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 9 bereit

Maschenprobe

RemixHäkeln

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 52 Runden fertig

  1. Size before assembly: about 9.3 cm at the widest, 7.7 cm long; 31 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 3.6 cm at the widest, 5.7 cm long; 17 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre bottom line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 3.8 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 36 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 50 %) --> Bend ≈ 90° around round 17<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 6 twist 0 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 17, 0.5 st from the centre bottom line, toward the back <!-- st 0.64 back -->). Let it hang still turned the way it is sewn on (pinch it a little at the seam): its inside stays visible, it does not lie against the head.

  1. Size before assembly: about 1.6 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 2.1 cm at the widest, 1.6 cm long; 6 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Felt (white), 2 ovals 13×13 mm (on the body with head) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: between rounds 20 and 21, 4.5 st from the centre front line, toward the toy's left.
  • Safety eyes 6 mm (on the body with head): between rounds 20 and 21, 6 st apart (count along round 20: about 3 st each side of the centre front line).
  • Satin stitch (on the body with head) (2, symmetric: the toy's left side is described, the right is its mirror image): in white thread, a oval about 8.5 mm wide and 13 mm tall, horizontal stitches; centred in round 17, 1 st from the centre front line, toward the toy's left .
  • Satin stitch (on the body with head): in rose thread, a oval about 6 mm wide and 4 mm tall, horizontal stitches; centred between rounds 19 and 20, on the centre front line .
  • Embroidery in dark brown thread (on the body with head), straight stitches through: (in round 19, on the centre front line ) → (in round 18, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 18 and 19, 2 st from the centre front line, toward the toy's right ).
  • Embroidery in dark brown thread (on the body with head), straight stitches through: (in round 19, on the centre front line ) → (in round 18, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 18 and 19, 2 st from the centre front line, toward the toy's left ).

Body with head · R1–R5

MR××××××VVVVVV×V×V×

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done