amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Meerestiere

Clownfish Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 61 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorMeerestiere

Schwierigkeit
1/3
Zeit
~2 Std.
Größe
9 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

A free crochet fish pattern for a chubby clownfish with big shiny eyes and a little round open mouth. This amigurumi clownfish is bright orange with three white bands outlined in black, and every fin, from the round dorsal fin to the fan tail, has a crisp black edge. The body is worked in the round in single crochet from the tail to the face with the stripes as color changes, the fins are small lightly stuffed pieces sewn on, and with DK yarn, a 2.5 mm hook and 14 mm safety eyes it is about 9 cm (3.5 in) tall. Follow it round by round with stitch counts and turn the interactive 3D model to see where every fin goes.

Clownfish häkeln

Für Anfänger · 9 cm hoch · etwa 2 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 8 Teile in Runden: Body, Tail fin, Dorsal fin, Lower fin, Side fin ×2, Cheek ×2 (insgesamt 61 Runden).
  2. Fülle und montiere in 6 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 9 bereit

Mehr wie dieses

Alles in meerestiere →
  • Vorschau von Tiny Blue Turtle
    Generator
    HäkelnRemix

    Tiny Blue Turtle

    vom Anleitungsgenerator

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 55 Runden fertig

  1. Size before assembly: about 6.8 cm at the widest, 8.9 cm long; 29 rounds.
  2. Change to ink (pull it through on the last yarn-over of R4).
  3. Change to snow (pull it through on the last yarn-over of R5).
  4. Change to ink (pull it through on the last yarn-over of R7).
  5. Change to orange (pull it through on the last yarn-over of R8).
  6. Change to ink (pull it through on the last yarn-over of R12).
  7. Change to snow (pull it through on the last yarn-over of R13).
  8. Change to ink (pull it through on the last yarn-over of R16).
  9. Change to orange (pull it through on the last yarn-over of R17).
  10. Change to ink (pull it through on the last yarn-over of R20).
  11. Change to snow (pull it through on the last yarn-over of R21).
  12. Change to ink (pull it through on the last yarn-over of R23).
  13. Change to orange (pull it through on the last yarn-over of R24).
  14. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  15. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.9 cm at the widest, 2.7 cm long; 9 rounds.
  2. Change to ink (pull it through on the last yarn-over of R7).
  3. → Start stuffing (lightly) and keep adding as you decrease.
  4. Press the piece flat to about 9 mm thick (oval cross-section).<!-- press the piece flat by 70 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 12 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.4 cm at the widest, 2.5 cm long; 8 rounds.
  2. Change to ink (pull it through on the last yarn-over of R6).
  3. → Start stuffing (lightly) and keep adding as you decrease.
  4. Press the piece flat to about 7 mm thick (oval cross-section).<!-- press the piece flat by 70 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 9 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.6 cm at the widest, 1.9 cm long; 6 rounds.
  2. Change to ink (pull it through on the last yarn-over of R4).
  3. → Start stuffing (lightly) and keep adding as you decrease.
  4. Press the piece flat to about 5 mm thick (oval cross-section).<!-- press the piece flat by 70 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2 cm at the widest, 2.2 cm long; 7 rounds.
  2. Change to ink (pull it through on the last yarn-over of R5).
  3. → Start stuffing (lightly) and keep adding as you decrease.
  4. Press the piece flat to about 6 mm thick (oval cross-section).<!-- press the piece flat by 70 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 14 mm (on the body): between rounds 26 and 27, 8 st apart (count along round 26: about 3.8 st each side of the centre top line).
  • Satin stitch (on the body): in mouth thread, a oval about 6 mm wide and 5 mm tall, horizontal stitches; centred between rounds 28 and 29, on the centre bottom line .

Body · R1–R5

MR×××××××V×V×V××V××

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Pink Starfish in Green Shorts
    Generator
    HäkelnRemix

    Pink Starfish in Green Shorts

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von No-Sew Mini Whale
    Generator
    HäkelnRemix

    No-Sew Mini Whale

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von No-Sew Narwhal
    Generator
    HäkelnRemix

    No-Sew Narwhal

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Squid Keychain
    Generator
    HäkelnRemix

    Squid Keychain

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Worry Octopus
    Generator
    HäkelnRemix

    Worry Octopus

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Seal Doing a Belly Flop
    Generator
    HäkelnRemix

    Seal Doing a Belly Flop

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Kraken in a Teacup
    Generator
    HäkelnRemix

    Kraken in a Teacup

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Axolotl Leaning on a Heart
    Generator
    HäkelnRemix

    Axolotl Leaning on a Heart

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Gamer Axolotl with Headphones
    Generator
    HäkelnRemix

    Gamer Axolotl with Headphones

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Seahorse Holding a Pearl
    Generator
    HäkelnRemix

    Seahorse Holding a Pearl

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Offended Puffed-Up Pufferfish
    Generator
    HäkelnRemix

    Offended Puffed-Up Pufferfish

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • V××V××V×××V×××V×××××V××××V××××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done